this is what I get Warning: mysql_connect() [function.mysql-connect]: Access denied for user 'nobody'@'localhost' (using password: NO) on line 25...
Most of my thoughts are just from what I have experienced. I have no experience with this particular hull. But over time, different eras of boat...
Well I am not sure of the benefits versus some of the downsides of batten seam only between frames, IMHO. I take it that they run the length of...
Batten seamed construction on planked hulls are normally notched into the frames and run continuously and not normally pieces between the frames...
My warning was a bit tongue in cheek. That fellow has done one of the most first class jobs on that boat. I am truely a fan of lapstrake. I guess...
Are you able to take any digital pictures and post them? Oh quick question, lightbulb moment, does the interior bottom planks have fiberglass on it?
This is another 32 foot hull built with strips and skinned with the diagonal veneers. This boat has been built by one individual by himself. You...
Is the the boat? [IMG] http://www.fishunclebuddy.com/ I think that what you are viewing is called butt blocks. I would be interested in...
There are a lot of hulls that would work. The hull that you like is more of a tradition designed hull with round bilges. Given that you have never...
You get a solid wooden hull. When hull designs and sizes calls for thick scantlings,you can build up a thicker hull with several thinner layers,...
I am not sure if I understand you. But normally in strip plank construction fasteners are placed from one strip to the other in this manner....
First off an outboard boat, in addition to the bottom draft requires another ten or so inches for the running part of the motor. Most true flats...
Are you looking for any contract work off the premise?
Cedar is still the wood of choice for me. We use white cedar or in some cases its called juniper in some circles. The western red cedars or port...
We really need to look at the specific plans and your intent on just creating a neat and unusual boat or making an attempt to recreate a specific...
If you are asking me about what kind of boat? Thats not for me to even address. Choosing a boat is entirely a personal choice depending on your...
Well I have only used rescorninol glues before epoxy. I have used Titebond in strip planked canoes and in strip planked construction in small...
http://boatdesign.net/forums/showthread.php?t=14604 another thread addressing this topic.
There are many designs that fit your bill of fare. Stroll right on over to this site for a while. Next your concern of the costs must be removed,...
When you are doing your scarf, use a backing board across the intended joint under the bottom side that makes a more uniform seam when planning...
