I do it two ways. Butt joints in small hulls creates hard points, especially if you do not intend on using any fiberglass and fairing compounds....
Well blindly talking here, normally most all gelcoat hulls of any age should be primed before putting a two part high gloss paint on it....
This reply could go on forever concerning cold mould hulls. The key to cold mould building is that the boat is properly engineered. But heck along...
Is it flitched cut or S4S. And how is the pricing, bd ft?> More details please
If I read you correctly, you intend on making this boat an inboard with the prop shaft and strut under the bottom? If not what is you plans for...
In the beginning, this almost sounds like you have a searail along your countertop, and the raised area carries a thick layer of this finish? I...
Check this link out. Been there, done that, fortunately, it wasn't in my hull. But the sad thing was and is, its in a 22 foot Grey Seal, built...
I would interested in knowing, if possible, who originally built your boat. I am an old timey garvey and spoon bow Chincoteague Scow enthusiast...
http://boatdesign.net/forums/profile.php?do=editlist The forum hardware offers a great feature in each members profile setup called a...
Guillermo Senior Member I commend you for your complete post, but in particular the above thoughts. Nicely spoken in typeset.
And then there seems to just be flamers, spoken in the name of "warnings" for one and all. Dealing with this issue here, and several other open...
Yes to your question, and if you wish to gather some thoughts without the normal static, feel free to send me a PM and would enjoy talking with...
perfect condition, runs, with built in fuel tank. I have the original magazine sales flyer. PM if you are interested and will quote price. Not...
There is not one design that cannot be built with alternative methods with proper planning and discussion. But first one has to convey their...
Sure we all can differ in opinions. But first, as stated, we must begin by looking at each design. You have yet to provide anything to explain...
