Electrical system [IMG]
console in progress [IMG] plug for the lap top [IMG]
Eucalyptus wood , white construction glue and PL glue + nails . I gave 1 coat top/under of sherwin williams deck scape before installing , then 2...
got my answer on another board ! deflection starts at 300 pounds :D
top is 12 feet x 8 feet materiel is 2 inch x 1 inch .120 mm and 1/8 tig welded supports are 78 inch long bolted to the pontoon railing and...
[IMG] the structure is a permanent hard top for my pontoon i just want to make sure if for some reason i can walk or crawl on it ...lights ect...
[IMG]
Im currently in the process of building a hard top for my pontoon . The materiel is rectangle aluminum tube 2x1x120 wall roof is 12 x 8 all the...
the snow is gone , i'm putting this project in high gear !!! So far the see-doo is mounted with gizmo's ...detachable .Pilot console ,seats and...
thats what i was thinking . So if for example i would have a motor with more hp but the same rpm my top speed would remain the same but my take...
Im about to use everything out of a yamaha waverunner 650 including turbine to swap on my pontoon . My question is in a near future if i would...
i still think a gear box would be a lot better but i will do with what i have for now ! If someone comes across a part number for a gear box let...
going 360 with the pontoon will be very use full for docking .
thanks for the explanation :) i'm not expecting to back-up at 10 mph but i'm sure it will beat pushing in the water :p
what can i compare 2 x 55hp yamaha jet ski pushing my 26 feet pontoon . My buddy as a 115 hp 4 stroke in a heavy 28 foot i wonder if i will...
i'm going to drop 2 yamaha engine inside the pontoon tube. 1 on each side with a reverse on each side 360 degree turning should be fine :D
1997 yamaha waverunner
no there is no reverse on my jet ski now !
i found a bit of info about a volvo gear box forward,neutral,reverse ! part number ?
I'm about to drop engine and jet drive out of a yamaha waverunner 650 into a pontoon . Anybody has a simple way to make a reverse on it ? :idea: