you can buy used rigs and sails otherwise 85k is not feasable, maybe if you bought used engine etc
Give to me your email, I have such a design, a high lats sailing boat in Alu
every planing boat I ever built had a 6mm bottom 20 to 29 feet deadrise midships 25 deadrise station two 43 none used on lakes or rivers
can not happen on that diesel
increased volume fwds, it is an ongoing exercise and there are so many similar vessels, concept wise in Europe, that I learn from lots of it is a...
absolutely true Ole Son
absolutely true my boy
it shows concave in blue, normal developable surfaces in brown, so you can pull any shape into a plate flair looks good but you need forming...
plan of deck[ATTACH]
you really need to post the sections. profiles do not tell much. thank youo_O
ok, pulles all shape out gussean curvature is wizard[ATTACH]
depends if the engine exhaust was open to the sea, if not then only other thing would be jacket water leak fro head gasket
sounds like hydraulic lock, in fact bet my boots on it
One would laugh, but it is no joke to come up against this nonsense if not plying for reward, I doubt any certifacation would be necessary, ask...
looks great, amazed that it shows no rust, are seams joggled, I dunno, but the boat is very fair, what is your location
true after65 years playing, sailing, helming, building,all I do is follow my gut feeling as to what will work
one thing that can not be avoided is the aspect ratio of the rudder, draft limits that, all one can do, is have a good section and balence,...
of coarse Ignatio, you are a good bloke when we stretch the centre of a plate to take up the for and aft curve, it often gets belly in it , but if...
here is a great boat by Rob Humphreys N.A UK[ATTACH]
disagree entirely with this, besides the lines are in constant review
