Scott it looks like you a going to pull off an epic gel coat. It appears as though you’re just changing the background. Or are you also...
Ok it would appear you are right handed, with this much action you needed to pull your tape much earlier . Right after you made your last pass. If...
Thanks I’m getting close to having all the boat sanded removed all the hardware and hinges. Just finished striping out all the Sea Deck flowing in...
Ok I’ve been thinking about the bottom of the boat.there a sad few creases/ foil lines on the bottom of the boat that are below the waterline and...
[ATTACH] I have bass wood 15 10 20 “ in dia and up to 30 or 40 ft lg Here is a picture of a cluster I have lots of clusters scattered thru out...
[ATTACH] Not shooting much color and the color is gel coat straight from Ranger. That I will thin down with Duratec as they recommend me to do....
Thanks ondarvr, Looking at hiding out the area in blue that needs to be white in my new scream with white I got from ranger in my first shoot....
This is gel coat plan I’m going to do. Plan on setting up a couple cameras and documenting the shoot along with a few flash points of the prep...
[ATTACH] My pleasure has always been accomplishing something that is in my focus rather than passing it on to others. Yes I could pass this on to...
Sorry to hear negative comments. It’s only a problem if you don’t have a clue. Being the last 30 some years I’ve spent my life creating from...
Ok it’s been a couple months and I’m still locked in snow. Fortunately there are lots to do on this boat and I have the ability to design. Putting...
Burn crash and die. You want to go fast put a bike engine on it and a direct drive a 5 speed automatic drive abs tonnel haul
Well I’m looking for new info on this process of gelcoating the whole boat down to the waterline. I have purchased 2 gal of 180 clear gelcoat and...
So how do I tape off for the pin stripe? Do I mask off the pin stripe first and gel coat with clear and gold flake first let it kick then pull...
Is there anyone that has payed gel coat in multiple colors with glitter flake separated by a pin stripe in gelcoat 1/2 inch wide. This spring as...
Wow I didn’t see ondarvrs reply. That sounds right. I will do a couple practice runs on a sheet of Formica to see how it works. Have any of you...
Ok my next question is not so simple. Basically going to throw down 2 colors red and blue the third color is the original white. Seperating the...
Thanks for the help, I did this in paint on the computer and rolled d Body lines on the boat the red is going to be a little deeper and richer,...
[ATTACH]
Ok having problems posting a picture
