wiggle drive

Discussion in 'DIY Marinizing' started by SudorracMechEng, May 7, 2012.

Thread Status:
Not open for further replies.
  1. SudorracMechEng
    Joined: Mar 2012
    Posts: 22
    Likes: 2, Points: 0, Legacy Rep: 15
    Location: australia

    SudorracMechEng Junior Member

    Hi, i was looking at using the wiggle drive for a surfboard application - whereby two fins could be oscillating and a system will be in place to lock the fins in initial position once desired speed is achieved.

    I am a final year mechanical engineering student, I am wondering which principle is used for the following: (ill try my best to explain)

    The two fins will be Vertically mounted, they will flap from left to right and the pitch will be around +- 15 degrees.

    It will be running off the same idea as this video

    http://www.youtube.com/watch?v=DtD09MTUsnE
     
  2. gonzo
    Joined: Aug 2002
    Posts: 13,342
    Likes: 325, Points: 93, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    You should only post once. It makes it very confusing otherwise.
     
  3. Boat Design Net Moderator
    Joined: Feb 2010
    Posts: 482
    Likes: 83, Points: 28, Legacy Rep: 1004
    Location: www.boatdesign.net

    Boat Design Net Moderator Moderator

    Last edited: May 7, 2012
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.
Thread Status:
Not open for further replies.