volvo 290/454 mercruiser

Discussion in 'Sterndrives' started by pursuitkyle, Dec 24, 2006.

  1. pursuitkyle
    Joined: Dec 2006
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ketchikan,AK

    pursuitkyle New Member

    Hi all, I have a volvo 290 outdrive and a 454 mercruiser does this have a gimble bearing or does it have a bearing on each side of the transom and if that is the case the engin has to come out as well correct? also I cant find any info on the 290 on the net any links would be helpful
    Thank you
     
  2. drdarrin
    Joined: Dec 2006
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Sacramento

    drdarrin New Member

    check out marineparts.com for information on the 290 outdrive. they have the volvo parts diagrams for that model there.
     
  3. gonzo
    Joined: Aug 2002
    Posts: 14,276
    Likes: 584, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    The bearings are held with lockrings. The engine has to come out. You need to disconnect the bellhousing.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.