vacuum pump

I have available to me the mark 6 would this work for a flat panal say 150"by 50" also infusion maybe in future.

thanks,
http://www.vac-u-clamp.com/products/individual-pumps/index.htm

Edit; i see the size it plenty big for what i need maybe a better question is the piston type verses rotary vain.

 

after all the searching i've done on the forum i can't find an answer.

so i have some choices gast pump. roc-r or rotary vane?

also oil ,or oiless??

or if someone knows of a thread that will answer this that would also work but i can't find it.

 

I have a lot of oil lubricated vane pumps running, and they are about all trouble free. Just replace the oil yearly. Mostly available in the higher capacity range. (15-100 m3/h)

The roc-r pumps generate just a little less vacuum, but are also cheap to run (maintenance) but in general are a lot smaller. (2-10 m3/h).

Oil free pumps are nice to have in the car. If they fall over, they do not leak oil...

 

ok thanks,i've found this one for a reasonable price.
http://www.veneersupplies.com/products/Vacuum-Pump---Gast-55-CFM-120-VAC-Condition-New.html

 

most people use rotary vane pumps for infusion work over here...

 

You can get a really great one on ebay if you look for the items sold by bluelooneym I bought a 5 cfm pump for $79 plus shipping and it works great, also it's a continuous operation pump.

Great price on a good pump.