Usefull Tach/hour Meter For All Engines

Discussion in 'OnBoard Electronics & Controls' started by pistnbroke, Feb 19, 2009.

  1. pistnbroke
    Joined: Jan 2009
    Posts: 1,405
    Likes: 33, Points: 48, Legacy Rep: 404
    Location: Noosa.Australia where god kissed the earth.

    pistnbroke I try

    Came across this digital hour tacho meter whist building my Thai Longtail
    works with all engines 1 stroke 2 stroke and 4 stroke . Large 8.5mm digits and reads rpm to 25,000 +...I know a lot of you dont read DIY maranising so I thought it might catch you here.
    ADDED 2/21/09 there is a 1.7m cable the end of which wraps around any plug lead to pick up a signal to activate the tacho. Picture added

    In US contact jimspring@verison.net ( about $32 + post)
    In Australia contact noosapropshop@yahoo.com.au ( $65 inc Express post)

    enjoy..
     

    Attached Files:

  2. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 146, Points: 0, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    Sounds pretty good for the price....
    What does it connect to for pickup?
     
  3. pistnbroke
    Joined: Jan 2009
    Posts: 1,405
    Likes: 33, Points: 48, Legacy Rep: 404
    Location: Noosa.Australia where god kissed the earth.

    pistnbroke I try

    Have added it into my original post but there is a 1.7m (5.6ft) cable attached the end of which wraps 4 times around a plug lead . this cable can be extended without soldering to any length....see photo below
     

    Attached Files:


  4. rasorinc
    Joined: Nov 2007
    Posts: 1,854
    Likes: 70, Points: 48, Legacy Rep: 896
    Location: OREGON

    rasorinc Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.