Urgent help needed in GHS

Discussion in 'Software' started by Siddarth Amaravathi, Sep 27, 2022.

  1. Siddarth Amaravathi
    Joined: Apr 2021
    Posts: 17
    Likes: 0, Points: 1
    Location: India

    Siddarth Amaravathi Junior Member

    I recently joined a job as a fresher naval architect and started learning GHS and was recently working on loading conditions. I've ran 48 combinations of loading conditions for a vessel with varying loads. I've filled the tanks ran everything and everything was perfect. Is there anyway i could get a list at the end of the report which consists load condition number, draft, trim, heel, displacement. I would be really glad if someone comes with a solution to this
  2. Lior Goldberg
    Joined: Nov 2022
    Posts: 2
    Likes: 0, Points: 1
    Location: Israel

    Lior Goldberg New Member

    Hi Siddarth,
    What I recommend you do is create separate GHS run files for each loading condition and then in a separate "Main" run file create variables with each loading condition run file name and then run those files using the variables. For example
    variables b0 = "A1- Ballast_Arrival", b1 = "Car_light"
    macro Main
    run {b{j}.rf}
    After that you can use each variable for the report using the GHS command.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.