Transom Extension on Gemini Cat

Discussion in 'Multihulls' started by SURRYEQUIP, Jan 27, 2007.

  1. SURRYEQUIP
    Joined: Feb 2006
    Posts: 14
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: VIRGINIA

    SURRYEQUIP Junior Member

    We have a Gemini 3000 that I believe is overloaded in the rear. However, I am not willing to give up what we carry. Last summer we checked boat speed in flat water then my wife and I walked to the front of the boat and we picked up almost 2 knots. My cat racing experience says you never want the transom "dragging" so I am assuming that still applies. My transoms must be 8 inches in the water. I can move some weight forward but there's a limit. I have seen on the Seawind 1000 (http://www.scoaa.net/hull066/extension.htm) extensions put on the transom and I am thinking about that. They are sort of sugar scoop extensions with steps which would be nice. Doesn't look that tough to do with the boat out of the water but what result will I have? The Seawind folks like it. Comments?
     
  2. fhrussell
    Joined: Dec 2004
    Posts: 156
    Likes: 2, Points: 18, Legacy Rep: 30
    Location: Long Island, NY

    fhrussell Boatbuilder

    You might want to talk to Mike Conley. He recently added stern extensions and plumbed the bows on a Macalpine-Downie Iriquois. It was an amazing project!

    "mike conley" <blkrkna3@comcast.net>

    Frank
     
  3. fhrussell
    Joined: Dec 2004
    Posts: 156
    Likes: 2, Points: 18, Legacy Rep: 30
    Location: Long Island, NY

    fhrussell Boatbuilder

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.