Interprotect 2000E over antifowling

Discussion in 'Materials' started by fiberglass jack, May 1, 2007.

  1. fiberglass jack
    Joined: Dec 2005
    Posts: 463
    Likes: 16, Points: 0, Legacy Rep: 95
    Location: toronto

    fiberglass jack Senior Member

    does anyone know if its possable to paint Interprotect 2000E over antifowling
    The bottom has a heavy layer of antifowling i think its micron, does the hull have to be totally clean or can a few patches of old fowling be left on, my concerns are that the old fowling will cause the Interprotect 2000E to lift. just wondering if anyone has done this in the past
     
  2. sailfastaz
    Joined: Mar 2006
    Posts: 4
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Arizona/Via Detroit

    sailfastaz New Member

    You are correct it will sluff off. Sand it all off wipe with acetone & apply.:rolleyes:
     
  3. lazeyjack

    lazeyjack Guest

    try a very sharp scraper one hand on the handle to pull the other over the head of it to apply light pressure, you may be very suprised how much control you have and how little effort it will take
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.