surface propeller

Discussion in 'Surface Drives' started by plattgatter, May 11, 2006.

  1. plattgatter
    Joined: May 2006
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Norway

    plattgatter Junior Member

    Hello, can somewon help me to find a used propeller 24-25" for surfacedrive??
     
  2. chan
    Joined: Jul 2006
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Sweden

    chan New Member

    Hi.
    Im afraid I dont have a 24-25" prop, but I have a 24x26" if that could do.
    I know someone who has a 23-25" and a 24-24".
    /Chan
     
  3. plattgatter
    Joined: May 2006
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Norway

    plattgatter Junior Member

    Surface propellere

    Hello, thank you for the mail, it was interesting.
    Can you give me a price on the propeller: 24-24 and 23-25??
    what type of bore is there in the propeller,tapped or splined??
    best regards
    Arne Helland.:) :)
     
  4. chan
    Joined: Jul 2006
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Sweden

    chan New Member

    Hi.
    Contact Motor Marine in Moss, Norway. They have some propellers.
    Mvh Chan
     
  5. plattgatter
    Joined: May 2006
    Posts: 7
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Norway

    plattgatter Junior Member

    Surface propellere

    Hei, ser du fra sverge. da trenger vi ikke skrive engelsk.
    du sa jo at du hadde propellere??
     
  6. xrudi
    Joined: Jul 2003
    Posts: 154
    Likes: 7, Points: 28, Legacy Rep: 75
    Location: Philippines

    xrudi Rudi Scholz

    We don't have used propellers but we make new ones for a resonable price:)
    rudi@levidrives.com
    Cheers Rudi
     
  7. xrudi
    Joined: Jul 2003
    Posts: 154
    Likes: 7, Points: 28, Legacy Rep: 75
    Location: Philippines

    xrudi Rudi Scholz

    Levi Drives LD170-150 with marinized Isuzu Engine 27.7 knots

    Test of Surface Propulsion unit Levi Drive 170-150 “Fisherman” with marinised Isuzu Truck Engine 4JB1
    coupled to a Koysan Hydraulic Gearbox H4
    Speed achieved 27.7 knots

    Base is a Isuzu 4JB1 second hand truck diesel engine. This engine was converted with our marinisation kit “Nicki” into a marine engine. This engine develops at 2300 rpm about 55 hp.The engine is coupled to a Koysan Hydraulic Marine Gearbox H4.

    This propulsion unit was installed in a 25 foot inshore fishing boat in Malaysia and the drive is a till steered Levi Drive LD 170-150 .

    “Levi Drives” produces 8 models covering the horse power range from 20 – 4000 hp.

    The LD 170-150 “Fisherman” is special low cost unit produced in galvanized steel for local fisherman. All other units are made from stainless steel 316L and have hydraulic steering.


    A maximum test speed of 27.7 knots was obtained.

    The fuel savings with surface propulsion and diesel engines compared with an outboard engine make every boat owner glad..


    “Capt. Choog” an other Happy “Levi Drive 170-150” owner.

    Tests were done on 10.Dec. 2006 in Penang, Malaysia.

    Cheers Rudi
     

  8. xrudi
    Joined: Jul 2003
    Posts: 154
    Likes: 7, Points: 28, Legacy Rep: 75
    Location: Philippines

    xrudi Rudi Scholz

    Low Cost Surface Drive for Fisherman

    Dear All,

    Sorry, this did not work so good. I try the same as attchment.

    Cheers Rudi
     

    Attached Files:

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.