The DELFIN...

Discussion in 'Boat Design' started by Sean Herron, Feb 11, 2007.

  1. Sean Herron
    Joined: May 2004
    Posts: 1,520
    Likes: 32, Points: 58, Legacy Rep: 417
    Location: Richmond, BC, CA.

    Sean Herron Senior Member

    Hello...

    An extremely rare steel Romsdal...

    This little voyager and her refit amounts to two years (and a bit) of my working life...

    This is a proper little ship...

    SH.
     

    Attached Files:

    Last edited: Feb 14, 2007
  2. Quicksilver
    Joined: Dec 2006
    Posts: 67
    Likes: 0, Points: 0, Legacy Rep: 14
    Location: Cooperstown, NY

    Quicksilver Junior Member

    dream cruiser right there. gorgeous. I absolutely love it. Met a couple in Florida with a similar design.

    what motors?
     
  3. Frosty

    Frosty Previous Member

    I like it too she is lovelly.

    My first impression of the photo is however that the travel lift must be struggling a bit and there looks like there's a lot of weight on the back sling there.

    But very very nice.
     
  4. Loveofsea
    Joined: Jan 2007
    Posts: 147
    Likes: 6, Points: 0, Legacy Rep: -68
    Location: Southern California

    Loveofsea New Member

    you could go anywhere in the world with that and i hope you do~
     
  5. Sean Herron
    Joined: May 2004
    Posts: 1,520
    Likes: 32, Points: 58, Legacy Rep: 417
    Location: Richmond, BC, CA.

    Sean Herron Senior Member

    Hello...

    Yes - this little thing is pretty much a go anywhere floating fuel tank - with reserves...

    It is steel - it is heavy - it is real...

    I managed to get an old 1964 blueprint from the owner and have posted my own efforts at restoring same in the gallery...

    Tough work...

    Anyone want to see the inside cabinet work - the carpenter is standing in the salon doorway...

    SH.
     

    Attached Files:

  6. Raggi_Thor
    Joined: Jan 2004
    Posts: 2,457
    Likes: 64, Points: 0, Legacy Rep: 711
    Location: Trondheim, NORWAY

    Raggi_Thor Nav.arch/Designer/Builder

    "Romsdal", that's a valley in Norway :)
    Nice little ship.
     
  7. Sean Herron
    Joined: May 2004
    Posts: 1,520
    Likes: 32, Points: 58, Legacy Rep: 417
    Location: Richmond, BC, CA.

    Sean Herron Senior Member

    No - a fjord - I think...

    Same thing I guess - just full of seawater...
     
  8. Raggi_Thor
    Joined: Jan 2004
    Posts: 2,457
    Likes: 64, Points: 0, Legacy Rep: 711
    Location: Trondheim, NORWAY

    Raggi_Thor Nav.arch/Designer/Builder

    I don't want to start an argument, but "dal" = "valley".
    Romsdalen = Roms valley.
    Outside that valley you have a fjord, Romsdalfjorden, "fjorden" = "the fjord".
    But I agree, when you fill a valley with water you get a fjord :)
     
  9. Sean Herron
    Joined: May 2004
    Posts: 1,520
    Likes: 32, Points: 58, Legacy Rep: 417
    Location: Richmond, BC, CA.

    Sean Herron Senior Member

    Thanks...

    Hello...

    It is useful to clear that up - and you are the person (native) to do so...

    Thanks - any info. you might dig up and translate into English regarding these boats and their builder would be appreciated...

    Cheers...

    SH.
     

    Attached Files:

  10. Raggi_Thor
    Joined: Jan 2004
    Posts: 2,457
    Likes: 64, Points: 0, Legacy Rep: 711
    Location: Trondheim, NORWAY

    Raggi_Thor Nav.arch/Designer/Builder

  11. Raggi_Thor
    Joined: Jan 2004
    Posts: 2,457
    Likes: 64, Points: 0, Legacy Rep: 711
    Location: Trondheim, NORWAY

    Raggi_Thor Nav.arch/Designer/Builder

  12. Sean Herron
    Joined: May 2004
    Posts: 1,520
    Likes: 32, Points: 58, Legacy Rep: 417
    Location: Richmond, BC, CA.

    Sean Herron Senior Member

    Thanks..

    Hello...

    Thanks for your work - go mix a drink and tend your garden now...

    I intend to do same - I have done enough work today ...

    Thanks again...

    RELAX now...

    Cheers...

    SH.
     
  13. Tad
    Joined: Mar 2002
    Posts: 2,321
    Likes: 214, Points: 73, Legacy Rep: 2281
    Location: Flattop Islands

    Tad Boat Designer

    Sean,

    Nice work, I'm happy to see the vee jointed overhead, not so happy with granite, no-fiddle counters, but it balances out. At least there's no nasty deckhouse expansions.

    I have a feeling the Romsdal Shipbuilders title was mostly a marketing tool. There where at least three separate lines of yachts built in Romsdal and based on fish boats. There where the early wooden double enders, these later steel boats, and then the wooden Malahides, four of which where originally built in Romsdal and completed in Ireland. I attach several Sea Magazine adds from the early 60's, one showing launching a wooden double ender in Romsdal, note she was built outside under a roof. I'll bet the steel ones where built the same way.

    The old drawing is a nice thing to have, too bad the original designer's name is gone. Only thing that bothers me is the slight hump in the sheer aft, I'd like it to have a slight hollow instead.

    All the best, Tad

    Romsdal1.jpg

    Romsdal2.jpg

    This is my most recent effort to capture a similar feeling and style in a simple modern package. She's a 40' by 16' flat-bottomed plywood skiff, for living aboard in the gulf islands. Power can be outboard or inboard, or a tiny tug.

    powerskiff4.jpg
     
  14. kabyak
    Joined: Mar 2007
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Seattle,WA

    kabyak New Member

    I was interested to happen on your Romsdal 55 drawing. I first encountered these boats via a 52' version that was listed on the east coast and featured in Passagemaker Spring '98 issue. I understand there to be a 55 in Anacortes,WA and another somewhere in BC. Is the owner you refer to of either of these boats?
     

  15. Patric McMenamin
    Joined: May 2018
    Posts: 1
    Likes: 0, Points: 1
    Location: Portland, Oregon

    Patric McMenamin New Member

    I believe your Delfin may be a Romsdal 55', twin to (and of) the Torsk (class) built from a Peter Varney design, possibly in the Hagen shipyard by Knut Hagen.
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.