Still Water Distortion Curve

Discussion in 'Boat Design' started by rehanjamshed, May 19, 2016.

  1. rehanjamshed
    Joined: Jun 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Torino, Italy

    rehanjamshed Junior Member

    Hi,

    I am looking for the following along the length for a boat or ship:

    - Weight distribution curve
    - Buoyancy distribution curve
    - Cross section area variation curve
    - 2nd Moment of area variation curve
    - Still water distortion curve under the above loads

    I need to validate my FEM code that simulates Still Water Distortion for the above mentioned ship.

    Thanks
     
  2. gonzo
    Joined: Aug 2002
    Posts: 14,755
    Likes: 759, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    What ship?
     
  3. rehanjamshed
    Joined: Jun 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Torino, Italy

    rehanjamshed Junior Member

    Can be any ship.
    I just need to use as an example to show that my FEM code gives same deflection curves as that published example
     
  4. gonzo
    Joined: Aug 2002
    Posts: 14,755
    Likes: 759, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    Which published example?
     
  5. rehanjamshed
    Joined: Jun 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Torino, Italy

    rehanjamshed Junior Member

    If I knew the example, why would I ask the question ?

    Ganzo, my question is simple and straight forward. Please reply if you know.

    Thanks.
     
  6. gonzo
    Joined: Aug 2002
    Posts: 14,755
    Likes: 759, Points: 123, Legacy Rep: 2031
    Location: Milwaukee, WI

    gonzo Senior Member

    You ask about a published example. However, you need to post a link to the example you refer to.
     
  7. rehanjamshed
    Joined: Jun 2015
    Posts: 8
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Torino, Italy

    rehanjamshed Junior Member

    I am not refering to any example.

    I am "searching" and "looking for" an example. That was my question.

    If had one already, why would I ask for the one.

    In the text books I have, so far, I could not find an example with all curves included.
    The LOAD, Area MOI, BUOYANCY and DEFLECTION

    thanks
     

  8. Ad Hoc
    Joined: Oct 2008
    Posts: 6,702
    Likes: 684, Points: 113, Legacy Rep: 2488
    Location: Japan

    Ad Hoc Naval Architect

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.