Hull scantlings

Discussion in 'Metal Boat Building' started by richard orr, Aug 13, 2013.

  1. richard orr
    Joined: Aug 2013
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: fayetteville ark

    richard orr New Member

    I am planning to build a 32' x 6' x 2' flat bottomed steel hulled sternwheel steamboat to be used only in rivers. Am wondering what gauge of metal to use on bottom and sides. Wanting to keep it light as possible.
     
  2. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Welcome to the forum.

    You do realize that's an imposable to answer question right? Scantlings are based on loading and weights. Have you performed a weight study? What steel build method will you be using (yep, there's more then one)? Keeping her light is a wise thing, but without a lot more information about the design, it's parameters and hydrostatics, any suggestions would just be a guess.
     
  3. Eric Sponberg
    Joined: Dec 2001
    Posts: 2,021
    Likes: 248, Points: 73, Legacy Rep: 2917
    Location: On board Corroboree

    Eric Sponberg Senior Member

    As PAR said, welcome to the forum. The thickness of the plating is determined in conjunction with the number and size of the frames. More frames will allow for thinner plating. But to find out what these sizes are is determined by an proper engineering approach. There are lots of calculations to do and iterations to make to arrive at the best solution. You should consult a naval architect and/or experienced boatbuilder for further advice. A simple answer cannot be given in a forum such as this.
    Eric
     

  4. SamSam
    Joined: Feb 2005
    Posts: 3,899
    Likes: 200, Points: 63, Legacy Rep: 971
    Location: Coastal Georgia

    SamSam Senior Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.