Standard For New Construction An Aluminium Boat

Discussion in 'Class Societies' started by naserrishehri, Feb 10, 2010.

  1. naserrishehri
    Joined: Jun 2006
    Posts: 168
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: iran bushehr

    naserrishehri Senior Member

    Hi Every Body
    Does Any Body Know Any Standard Like Iacs No.47 For An Aluminium Boat Construction?
     
  2. valber
    Joined: Feb 2006
    Posts: 56
    Likes: 5, Points: 8, Legacy Rep: 97
    Location: Ukraine

    valber Naval Architect

    Read ABS Rules. May be it will be helpful for you...
     
  3. naserrishehri
    Joined: Jun 2006
    Posts: 168
    Likes: 0, Points: 16, Legacy Rep: 10
    Location: iran bushehr

    naserrishehri Senior Member

    Thanks A Lot For Your Helpful Informations.
    I Have Decided To Prepare A Standard For A Small Yard By Changing
    Iacs No.47 For Steel To A Standard For Al Ships.is It Good In Your Mind?
    To Change Rulls I Have To Study About Aluminium Rulls
     

  4. Ike
    Joined: Apr 2006
    Posts: 2,607
    Likes: 416, Points: 83, Legacy Rep: 1669
    Location: Washington

    Ike Senior Member

    Have you tried the Metal Boat Society? http://www.metalboatsociety.org/

    I am sure they can point you to lots of references on this. The USCG used to have a booklet dealing solely with scantling rules for aluminum boats. You may want to check with the MArine Safety Center http://www.uscg.mil/HQ/msc/
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.