speed boat design

Discussion in 'Boat Design' started by tonipu, Jan 12, 2021.

  1. TANSL
    Joined: Sep 2011
    Posts: 6,380
    Likes: 338, Points: 93, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    But that is very lax, don't you think? How can results be compared if it cannot be ensured that the "inputs" are the same in all tests?
     
  2. tonipu
    Joined: Dec 2014
    Posts: 91
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: croatia

    tonipu Junior Member

    i will try to figure out how to do better next test
     
  3. tonipu
    Joined: Dec 2014
    Posts: 91
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: croatia

    tonipu Junior Member

  4. tonipu
    Joined: Dec 2014
    Posts: 91
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: croatia

    tonipu Junior Member

    rc testing

    it is only video, i made 20 minutes of testing, but i film only this. later litle water entered and the motor controler go in smoke.

    i see submarining, on following sea and speed greater than froude 1.5, in head sea it do very well, very litle slaming

    model 1:20
     
  5. tonipu
    Joined: Dec 2014
    Posts: 91
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: croatia

    tonipu Junior Member

    i see some submarinig but not broaching efect as i do very sudden ruder turn
     

  6. tonipu
    Joined: Dec 2014
    Posts: 91
    Likes: 0, Points: 6, Legacy Rep: 10
    Location: croatia

    tonipu Junior Member

    and the hump is not pronounced
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.