simrad ap 25 control head

Discussion in 'All Things Boats & Boating' started by jbtieder, Aug 11, 2016.

  1. jbtieder
    Joined: Aug 2016
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Taylors Island, Md

    jbtieder New Member

    does anyone have or know where a working simrad ap25 control head may be. I am looking for one for mine has died.
     
  2. hoytedow
    Joined: Sep 2009
    Posts: 5,774
    Likes: 351, Points: 93, Legacy Rep: 2489
    Location: The Land of Lost Content

    hoytedow Fly on the Wall - Miss ddt yet?

  3. jbtieder
    Joined: Aug 2016
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Taylors Island, Md

    jbtieder New Member

    Lucky i took it to Howard Rock in Nags Head and Kevin did a bench test of the control head and the computer an AC20. It all checked out ok. I must have bad cabling.
     

  4. kapnD
    Joined: Jan 2003
    Posts: 839
    Likes: 130, Points: 43, Legacy Rep: 40
    Location: hawaii, usa

    kapnD Senior Member

    If you plug in a lot of inputs into Simnet, you have to be sure that the power input is in or at least near the center of the backbone.
    I'm not a tech guy, couldn't tell you why, but some inputs will suffer if you don't set it up this way.
    Howard is the man to see, gotta love that inventory!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.