Help new member needs help!!!

I am going to build a small 10 foot boat that i will run in fresh waters and i was wondering what i need to do to push the thing. i want an small inboard motor that will give me speed but not that much weight and space. i need help knowing what it will need and stuff. if anyone has time to post all the dtails and stuff i would really love that but if you could direct me some where that would be nice too. i am 16 and need to fund my own projects so nothing too expensive.
Thanks,
Mark.

 

Mark,

Get yourself a copy of Chapman's (piloting, seamanship, & small boat handling).

It will give you important basics that will help allow you to make good & safe decisions as you pursue your interest in boats.

Barnes & Noble, and like places, have many marine books (at least the ones closer to water, like yours). Between purchased books, the library, and Net, you will find much info.

Take care, and welcome to the forum.

TGoz

 

If you just want to get out on the water, buy a used skiff and motor. You will save time and money. LOTS of time...

If you really want to build, your first boat should be from plans (and instructions) developed by an expert. Payson has a good book, and there are many others. For propulsion, you DEFINITELY should use an outboard for your first boat. Cheaper, simpler, better all-around.

For your second (or third, or...) boat, consider your experience, needs and capabilities, and build your dream boat.

Good luck!