Sea Sled madness. It’s in my brain.

Discussion in 'Fiberglass and Composite Boat Building' started by DogCavalry, Nov 11, 2019.

  1. Cajunpockettunnel
    Joined: Aug 2020
    Posts: 224
    Likes: 136, Points: 43
    Location: Franklin, LA

    Cajunpockettunnel Senior Member

    Short circuit......I smell the smoke from here big brother!:D:D
     
    BlueBell and DogCavalry like this.
  2. DogCavalry
    Joined: Sep 2019
    Posts: 3,093
    Likes: 1,578, Points: 113
    Location: Vancouver bc

    DogCavalry Senior Member

    Yeah. I drilled a few holes to let it out, after I got tired of my eyeballs popping out from overpressure.
     
  3. Cajunpockettunnel
    Joined: Aug 2020
    Posts: 224
    Likes: 136, Points: 43
    Location: Franklin, LA

    Cajunpockettunnel Senior Member

    :D:D:D HAHAHAHAHA!
     
  4. BlueBell
    Joined: May 2017
    Posts: 2,709
    Likes: 981, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    Is the inside already filleted, completely?
    If so, what radius?
    Anything else to go in before lay-up?
     
  5. DogCavalry
    Joined: Sep 2019
    Posts: 3,093
    Likes: 1,578, Points: 113
    Location: Vancouver bc

    DogCavalry Senior Member

    Nothing happened inside. Still has cracks from drying last spring.
     
  6. fallguy
    Joined: Dec 2016
    Posts: 7,644
    Likes: 1,688, Points: 123, Legacy Rep: 10
    Location: usa

    fallguy Senior Member

    Just line up some dry fall weather, your schedule and the flip.
     
  7. DogCavalry
    Joined: Sep 2019
    Posts: 3,093
    Likes: 1,578, Points: 113
    Location: Vancouver bc

    DogCavalry Senior Member

    I can only control 1 of those things.
     
  8. fallguy
    Joined: Dec 2016
    Posts: 7,644
    Likes: 1,688, Points: 123, Legacy Rep: 10
    Location: usa

    fallguy Senior Member

    u control the flip and your schedule; u own two of em
     
  9. BlueBell
    Joined: May 2017
    Posts: 2,709
    Likes: 981, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    Great weather in store.
    The temporary cover is for sun protection as much as rain/dew/bird pooh.
    Translucent plastic cover would provide wonderful, diffused light.
    Sides could roll up to provide open air ventilation.
    If allowed, make it oversized to compensate for your current cramped situation
    and give you plenty of room to work. If you're inclined to double-wall the plastic,
    a Herman-Nelson could keep your work space toasty warm this winter.

    EDIT: My main concern would be wind.
    Would you be able to tie it down?
     
    Last edited: Sep 1, 2020
  10. DogCavalry
    Joined: Sep 2019
    Posts: 3,093
    Likes: 1,578, Points: 113
    Location: Vancouver bc

    DogCavalry Senior Member

    Boat elevated.
     

    Attached Files:

  11. fallguy
    Joined: Dec 2016
    Posts: 7,644
    Likes: 1,688, Points: 123, Legacy Rep: 10
    Location: usa

    fallguy Senior Member

    I built yard dollies for mine. They were made with wood and trailer jacks. Just know that end grains do not support screws!

    You'd need 8 trailer tongue jacks. You could build them upside down to fit. Then roll the boat out; flip; put back inside.

    They ain't super great, but they got me by for a crude in n out the building trailer.
     
    DogCavalry likes this.
  12. BlueBell
    Joined: May 2017
    Posts: 2,709
    Likes: 981, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    Great pictures John.

    I spoke with John yesterday and he made a compelling argument for what he's doing.
     
    DogCavalry likes this.
  13. DogCavalry
    Joined: Sep 2019
    Posts: 3,093
    Likes: 1,578, Points: 113
    Location: Vancouver bc

    DogCavalry Senior Member

    I was all articulate like.
     
  14. BlueBell
    Joined: May 2017
    Posts: 2,709
    Likes: 981, Points: 113
    Location: Victoria BC Canada

    BlueBell . . . _ _ _ . . . _ _ _

    Ya, you're going to need lots of articulation in your shoulders!
     
    DogCavalry likes this.

  15. DogCavalry
    Joined: Sep 2019
    Posts: 3,093
    Likes: 1,578, Points: 113
    Location: Vancouver bc

    DogCavalry Senior Member

    So in a couple weeks I'll move my boat to a boatyard marina. No cover, and Vancouver is about to get rainy for 6 months. The interior, as you can see, is unfinished. 5 minute rain, and the boat is destroyed. Strip planks are not dimensionally stable.

    I'm calling in a favor to drag the boat out of the shop. My landscaping subcontractor will bring his medium excavator around, ease the boat out the. doors, down the long narrow driveway to the street, and flip it over. But I have to set that up 2 weeks ahead. I use him because he's good. Because he's good, he's busy. So rain or shine, that's when it happens.

    When that happens, that boat needs to be able to survive a few hours hard rain.
     
Loading...
Similar Threads
  1. Darkzillicon
    Replies:
    145
    Views:
    15,324
  2. Dillusion
    Replies:
    7
    Views:
    1,113
  3. Tungsten
    Replies:
    26
    Views:
    2,740
  4. valvebounce
    Replies:
    3
    Views:
    1,740
  5. Runhammar
    Replies:
    17
    Views:
    1,512
  6. fallguy
    Replies:
    4
    Views:
    958
  7. massandspace
    Replies:
    5
    Views:
    2,013
  8. fredrosse
    Replies:
    5
    Views:
    1,373
  9. Tiger51
    Replies:
    15
    Views:
    3,052
  10. cy fishburn
    Replies:
    5
    Views:
    1,914
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.