rudders

Discussion in 'Propulsion' started by bcclew, Oct 31, 2011.

  1. bcclew
    Joined: May 2011
    Posts: 11
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: new jersey

    bcclew Junior Member

    26 foot silverton single screw,are there any rudder changes tha t might make it steer a little better in reverse? the one thats on the boat is about 9 by 11 inches thanks
     
  2. daiquiri
    Joined: May 2004
    Posts: 5,371
    Likes: 259, Points: 93, Legacy Rep: 3380
    Location: Italy (Garda Lake) and Croatia (Istria)

    daiquiri Engineering and Design

    Any pics of the existing rudder?
     
  3. bcclew
    Joined: May 2011
    Posts: 11
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: new jersey

    bcclew Junior Member

    good idea ill try to get some on the weekend thanks
     
  4. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 502, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    If that's the hull I'm thinking it is, then rudder modifications will make only very slight improvements in reverse handling properties. How much single wheel experience do you have?
     
  5. michael pierzga
    Joined: Dec 2008
    Posts: 4,862
    Likes: 116, Points: 0, Legacy Rep: 1180
    Location: spain

    michael pierzga Senior Member

    Make sure your propeller is properly conditioned . Props are very inefficient in reverse, even worse when out of condition. An inefficient prop exaggerates prop walk
     
  6. bcclew
    Joined: May 2011
    Posts: 11
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: new jersey

    bcclew Junior Member

    not much in the single experience always had out drives or out boarbs
     
  7. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 502, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    Well, there you go. Bcclew, you need some time with the old gal. There are tricks and techniques that can make you live much easier. The fastest way to learn is to have an old single screw skipper give you some beer earning time, as you back and maneuver around in a secluded location (to save embarrassment). With practice, the single screw can become more tolerable, once you understand what she will and can't do.
     

  8. bcclew
    Joined: May 2011
    Posts: 11
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: new jersey

    bcclew Junior Member

    ok guys i took the easy way out sold the single screw bought a twin screw much better thanks to all!!!!!!!!!!!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.