Asymmetric spinnaker design

Discussion in 'Sailboats' started by TJL, Jul 25, 2011.

  1. TJL
    Joined: Jul 2011
    Posts: 2
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Sydney

    TJL New Member

    A curiosity question - what is the difference between an asymmetric spinnaker designed for an offshore yacht compared to an asymmetric spinnaker from an 18 foot skiff?
     
  2. powerabout
    Joined: Nov 2007
    Posts: 2,944
    Likes: 67, Points: 48, Legacy Rep: 719
    Location: Melbourne/Singapore/Italy

    powerabout Senior Member

    when you say offshore yacht do you mean a planing hull
     
  3. TJL
    Joined: Jul 2011
    Posts: 2
    Likes: 0, Points: 1, Legacy Rep: 10
    Location: Sydney

    TJL New Member

    This poses a variation on the same question - what is the difference in design between an asymmetric for an offshore planing hull versus an offshore displacement hull?
     
  4. Doug Lord
    Joined: May 2009
    Posts: 16,679
    Likes: 349, Points: 93, Legacy Rep: 1362
    Location: Cocoa, Florida

    Doug Lord Flight Ready

    You might be better off asking a sailmaker. Generally, the faster the boat the flatter the spinnaker .On very fast boats the asy spin becomes a screecher-very flat and more jib like-and can be roller furled.
     

  5. Stumble
    Joined: Oct 2008
    Posts: 1,913
    Likes: 73, Points: 48, Legacy Rep: 739
    Location: New Orleans

    Stumble Senior Member

    TJL,

    Just to elaborate on what Doug said. The design of the sail itself doesn't really change much. What changes is the designed angle of the apparent wind to the sail while flying. An asymetrical made for sailing dead down wind will look pretty much the same regardless of the boat, it will have a large windward projection, and a deeper cut draft.

    As the apparent wind angle moves forward (either due to boat speed, or sailing angle) the ideal sail will loose the windward projection, and the draft will start to flatten to look more like a jib. Typically the sails are given codes based upon their designed apparent wind angle, with a Code 0 being the most upwind, then a code 1a, code 2a, ect.

    In addition the weight of the material tends to get heavier as the sail is designed more for upwind. Though code 0's are often very light, since they can replace a wind seeker in very light air.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.