1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Robertson auto pilot complete AP45 system Kobelt 7050 and oil tank for hydraulic stee

Discussion in 'Marketplace' started by Toolman, Feb 22, 2008.

Thread Status:
Not open for further replies.
  1. Toolman
    Joined: Feb 2008
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA NewYork

    Toolman Junior Member

    I have some surplus steering and autopilot items left over and was wondering if there was a way to place for sale ads here on the Forum
    I have a Robertson AP45 complete auto pilot system
    and acomplte Hobelt model 7050 2"ID hydraulic steering cylinder with the fuild container with site glass
    The auto pilot has about 50hrs on components and the rudder controler is brand new in box
    The Hobelt Cylinder and oil container are brand new in box
    I am looking to sell they would be fine in vessel up to and maybe larger than 110'
    Thank You
    A Matsik
    Please let me know and I hope this is right place to do this
     
    Toolman, Feb 22, 2008
    #1
  2. Toolman
    Joined: Feb 2008
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA NewYork

    Toolman Junior Member

    Have other steering system parts and auto pilot unit parys for sale too
     
    Toolman, Feb 22, 2008
    #2
  3. Toolman
    Joined: Feb 2008
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA NewYork

    Toolman Junior Member

    I just was digging through the items and found a AP100dl control
    anyone who has this system knows they can not get this anymore
    I will take the 1st $200 offered for it
    It is in great working condition and never saw the water
    Let me know Thank You
     
    Toolman, Feb 23, 2008
    #3
  4. paulkr
    Joined: Jun 2005
    Posts: 21
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ft Lauderdale,Fl

    paulkr Junior Member

    Could you provide complete specs on the steering ram? Exact model #
    DO you have any manual hydraulic steering pumps?
    snarleyowpaul@msn.com
     
    paulkr, Feb 24, 2008
    #4
  5. Toolman
    Joined: Feb 2008
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA NewYork

    Toolman Junior Member

    Paul correction!!!!!!!!!!!!!!!!!!!!!!!!!!! LOOK !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    The steering ram is a Kobelt 7050 BX12 balanced 12" both ways Might be balanced 12" I have to check box OK What are you looking for on the cylinder? Balanced or unbalanced?
    I need to double check on the pump my partner has stock stored at his shop.
    Thanks Tony
     
    Toolman, Feb 24, 2008
    #5
  6. Toolman
    Joined: Feb 2008
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA NewYork

    Toolman Junior Member

    Will take $700 for Brand New in box NOS part they list for $1160.00 if you buy one
    Thanks Also have the header Tank with sight glass will sell for $200
     
    Toolman, Mar 1, 2008
    #6
  7. Capt. Mark
    Joined: Apr 2008
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Medford

    Capt. Mark New Member

    I am interested in the AP45 please call 781-864-4244
    thanks,
    Mark
     
    Capt. Mark, Apr 24, 2008
    #7
  8. skipperyachting
    Joined: Oct 2008
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: italy

    skipperyachting New Member

    seeking for display for Robertson AP 45

    could you please send me an email to skipper@yachting.it to let me know if is still available a display for Robertson AP45. I may be intrested in buying the whole system if the price is interesting.
    thanks a lot for replying
    regards
    Luca
     
    skipperyachting, Oct 27, 2008
    #8
  9. FAST FRED
    Joined: Oct 2002
    Posts: 4,519
    Likes: 111, Points: 63, Legacy Rep: 1009
    Location: Conn in summers , Ortona FL in winter , with big d

    FAST FRED Senior Member

    Perhaps you have a Hyd shift setup ?

    We have a mechanical shifted DD 6-71 , and an on board hyd system .

    FF
     
    FAST FRED, Nov 4, 2008
    #9
  10. mitchellyacht
    Joined: Nov 2008
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Fort Lauderdale

    mitchellyacht New Member

    Is your AP45 still available

    Hi Toolman,

    Do you still have your AP45. If so how much do you want for it.

    Mitchellyachting
     
    mitchellyacht, Nov 10, 2008
    #10
  11. Oledoffen
    Joined: Jan 2009
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Norway

    Oledoffen New Member

    Ap45

    Do you still have that ap45 autopilot?
     
    Oledoffen, Jan 21, 2009
    #11
  12. viking41
    Joined: Aug 2009
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Wi

    viking41 New Member

    Any chance that you still have the AP 100 DL head that you mention in your posting last year? And if so, how do I contact you? Thanks
     
    viking41, Aug 3, 2009
    #12

  14. Toolman
    Joined: Feb 2008
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: USA NewYork

    Toolman Junior Member

    Sorry Everythings been sold
     
    Toolman, Aug 3, 2009
    #13
Loading...
Similar Threads
  1. Nausicaa

    Robertson Control Unit AP100

    Nausicaa, Sep 30, 2010, in forum: Marketplace
    Replies:
    0
    Views:
    1,947
    Nausicaa
    Sep 30, 2010
  2. middlemarinedub

    Boat Project - Dolph 36 (AutoCAD and 3D Model)

    middlemarinedub, Feb 5, 2019, in forum: Marketplace
    Replies:
    3
    Views:
    2,902
    middlemarinedub
    Aug 11, 2019
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.
Thread Status:
Not open for further replies.