Portager
Senior Member
I’ve been looking at the rigid buoyancy boats (RBB) as a possible tender for “Portager”. RBB look and perform like a rigid inflatable boat (RIB) except the entire boat is rigid. The advantage of the RBB, relative to a RIB, is the rigid material provides superior durability relative to sun and ozone exposure and reduced vulnerability to sharp rocks etc. while beaching. The RBB also maintains the stability and sea worthiness of the RIB, although it does give up the natural bumper and the ability to reduce space requirements by deflating.
Some people question the wisdom of a rigid boat emulating the shape of an inflatable boat. Although it is true that you can gain additional interior space by departing from the circular sponson shape, maintain the structurally efficient shape of the RIB allows the RBB to retain the weight advantage of the RIB. In addition, due to the higher strength to weight ratio of aluminum relative to inflatable materials, aluminum RBB can be slightly lighter that RIBs.
I have been seriously considering the 3.3 meter RBB made by Ocean Craft http://www.oceancraft.org/ in Caloundra, Australia and I am wondering if any list members have had any experience with these boats or the company that makes them.
I have compared the cost of the Ocean Craft 3.3m RBB plus shipping to the port of Los Angeles to that of a generic RIB at www.westmarine.com and it is about 25% lower. Combining the lower initial cost, with its minimal maintenance requirements and longer useful life the RBB appears to be a good value. It is also about 10% lighter than the generic RIB and a comparable Zodiac RIB. The Ocean Craft can be pressurized (which may make it more dent resistant) or filled with closed cell foam (although this option makes it heavier than a RIB). It can also be customized with hard attachment points and a “D” section foam bumper around the perimeter.
I would appreciate any comments and/or recommendation that any list members care to provide either online or by private message.
Thanks for your assistance;
Mike Schooley
Some people question the wisdom of a rigid boat emulating the shape of an inflatable boat. Although it is true that you can gain additional interior space by departing from the circular sponson shape, maintain the structurally efficient shape of the RIB allows the RBB to retain the weight advantage of the RIB. In addition, due to the higher strength to weight ratio of aluminum relative to inflatable materials, aluminum RBB can be slightly lighter that RIBs.
I have been seriously considering the 3.3 meter RBB made by Ocean Craft http://www.oceancraft.org/ in Caloundra, Australia and I am wondering if any list members have had any experience with these boats or the company that makes them.
I have compared the cost of the Ocean Craft 3.3m RBB plus shipping to the port of Los Angeles to that of a generic RIB at www.westmarine.com and it is about 25% lower. Combining the lower initial cost, with its minimal maintenance requirements and longer useful life the RBB appears to be a good value. It is also about 10% lighter than the generic RIB and a comparable Zodiac RIB. The Ocean Craft can be pressurized (which may make it more dent resistant) or filled with closed cell foam (although this option makes it heavier than a RIB). It can also be customized with hard attachment points and a “D” section foam bumper around the perimeter.
I would appreciate any comments and/or recommendation that any list members care to provide either online or by private message.
Thanks for your assistance;
Mike Schooley