Rhino joining/connecting surfaces?

Discussion in 'Software' started by JordieS, Oct 5, 2011.

  1. JordieS
    Joined: Apr 2011
    Posts: 89
    Likes: 1, Points: 0, Legacy Rep: 26
    Location: Australia

    JordieS Junior Member

    Hi all,

    It is hard to explain in words really but I want to join the surfaces I have created for sunpads and passenger/driver areas to the deck. Have a look at the pics and you will hopefully see what I mean.

    Thanks
     

    Attached Files:

  2. bhnautika
    Joined: Feb 2006
    Posts: 835
    Likes: 52, Points: 38, Legacy Rep: 571
    Location: australia

    bhnautika Senior Member

    JordieS there are many and varied ways of doing that but why not just extrude the deck edges down then trim them off flat.
     
  3. JordieS
    Joined: Apr 2011
    Posts: 89
    Likes: 1, Points: 0, Legacy Rep: 26
    Location: Australia

    JordieS Junior Member

    I figured out how to do it precisely thanks again bhnautika, it seems whenever I have a problem and I post it on here I then work it out!
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.