How much epoxy do I need for 310 sq ft of cloth?

OK, here's another question yet, sorry but i hate bunching questions in one post.

I need to lay down about 310 square feet of 1708 on my topsides (25' flybridge) so my question is, how much epoxy do I need to to use, being that it's getting rolled on? Thanks!

 

IIRC the easiest method is to weigh your fiberglass and then calculate the same weight of epoxy (for a 50/50 mix of glass & resin). Also IIRC a gallon of epoxy weights 8 lbs. / gallon. The other way to look at it is, your 1708 weighs 25 oz / sq yrd. Your flybridge is approx. 35 sq yrds. You'll need 875 ounces of epoxy which is just about 7 gallons +-. You should figure in a fudge factor of 15% for spillage, wastage & miscalculations like mine! ;-) good luck.

 

Damn Rick, you did all the work for me- thank you! Seeing as how I have about 4 gallons, I'll need about another 4 to be safe. Thanks again!

 

Good luck with your project Danny. Post some pics if you can.

 

Here's a limk to the latest work I've done to her. I actually installed one of the 4x8 sheets on the roof today, the other will go on tomorrow hopefully...

http://www.bloodydecks.com/forums/check-out-my-boat/119162-more-pics-savannah-ii.html

And here's a link to show what I started with.

http://www.bloodydecks.com/forums/b...ver-vinylester-resin.html?highlight=polyester

Warning, there may be some strong language on these other site's forums...