help with impellers

Discussion in 'Inboards' started by fourwinns88, Sep 5, 2007.

  1. fourwinns88
    Joined: Sep 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ma

    fourwinns88 New Member

    have an 88 four winns with the 4.3 omc cobra impeller went on me trying to replace and have been told that when the outdrive comes off the throttle sometimes has to be either in nutruel full forward or full reverse so i am trying to find out wich position it is supposed to be in to take the outdrive off thanks for any help
     
  2. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    if you haven't done this yet. the impeller is on the back of the drive eaziest one there is. all you have to do is remove the three cover bolts and the four water pump housing bolts replace impeller go
     
  3. fourwinns88
    Joined: Sep 2007
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ma

    fourwinns88 New Member

    thank you for the information i did remove that piece and fixed it thanks alot
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.