Random Picture Thread

Discussion in 'All Things Boats & Boating' started by kach22i, Mar 30, 2006.

  1. Mikebiggers
    Joined: Feb 2019
    Posts: 0
    Likes: 0, Points: 0
    Location: Moscow

    Mikebiggers New Member

  2. upchurchmr
    Joined: Feb 2011
    Posts: 3,287
    Likes: 259, Points: 83, Legacy Rep: 579
    Location: Ft. Worth, Tx, USA

    upchurchmr Senior Member

    Only 4 beds for 70' ?
    Windows on the waterline?
    Sandbags on the nose?
    Doesn't look like you could use a fishing pole off the stern.
    Where is the helicopter pad and the speed boat for getting to the shore?

    Not a fan at all.
     
  3. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    I've just read (Dutch link) that Sophia Flörsch is going to race again in March, as she ‘only’ had broken her seventh cervical vertebra in a crash, so I've looked up that crash on November 18, 2018 in Macau, she was 17 y/o back then. Got at the same time a side link from YouTube about the 2018 Top Fuel Drag Boat World Finals in Phoenix AZ...

    Sophia Flörsch's crash in the 2018 Macau Grand Prix from every angle . . :confused:


     
    Last edited: Feb 26, 2019
  4. Tiny Turnip
    Joined: Mar 2008
    Posts: 865
    Likes: 274, Points: 63, Legacy Rep: 743
    Location: Huddersfield, UK

    Tiny Turnip Senior Member

  5. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  6. Tiny Turnip
    Joined: Mar 2008
    Posts: 865
    Likes: 274, Points: 63, Legacy Rep: 743
    Location: Huddersfield, UK

    Tiny Turnip Senior Member

    Awesome, Angel, thanks for posting!
     
  7. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    The latter 2 lathe pics come from Austria . . :cool:

    P.S. - the first 3 pics hang around on Pinterest . . :)
     
    Last edited: Mar 10, 2019
  8. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    The sky looks like the limit there, put the tractor on a viaduct, and the woodworkers in the valley . . :eek:

    [​IMG]

    [​IMG]

    ‘‘ The P2 pier of the Viaduct is the tallest structure in France, 23 m taller than the Eiffel Tower. ’’
     
    Last edited: Mar 10, 2019
  9. Jolly Amaranto
    Joined: Jan 2012
    Posts: 54
    Likes: 19, Points: 18, Legacy Rep: 207
    Location: Texas

    Jolly Amaranto Junior Member

    On the Salmon River in Idaho with a sweep boat we built out of Army surplus bridge pontoons.
    pontoon (4).jpg
     
  10. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Now I'm wondering, that looks like a bow rudder up front, is it the end of an aft steering sweep that's just stored facing forward ?

    What kind of inflatable army bridge pontoons have an upwardly directed end on one side ?

    Anyways, you guys built a professional looking boat like the ones of Demaree . . :cool:

    [​IMG]

    When I looked for such army pontoons an inflatable dummy tank showed up . . :eek:

    [​IMG]
     
    Last edited: Mar 11, 2019
  11. Jolly Amaranto
    Joined: Jan 2012
    Posts: 54
    Likes: 19, Points: 18, Legacy Rep: 207
    Location: Texas

    Jolly Amaranto Junior Member

    It is basically an non propelled raft relying on the river current to move it down stream. We did have a small outboard motor that we could deploy in calm spots with little current and a headwind. The upturned ends were designed to head upstream in a current when used to support a bridge deck but for this use, they point down stream. There is a "sweep" oar in front and one in back. With two helmsmen working, you have better control in keeping the raft pointing down stream. You can move the craft sideways or rotate it to keep it pointed in the right direction in order to avoid rocks or take advantage of the fastest current. In this photo of the overturned frame, you can see the pivot point (oar lock) for one of the sweep oars in front of the knee of the guy in the foreground. We were repairing the bent frame that holds the pontoons before our next trip down the river.
    pontoon.jpeg

    Here is a shot I took after they dropped me off upstream to hike down to a rapids to record the action. They successfully missed hitting the big rock.;)
    pontoon (2).jpeg [/QUOTE]
     
  12. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Great story and pics Jolly, thanks for sharing . . :)
     
  13. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    I see this guy took over your cargo . . .

    [​IMG]
     
  14. Tiny Turnip
    Joined: Mar 2008
    Posts: 865
    Likes: 274, Points: 63, Legacy Rep: 743
    Location: Huddersfield, UK

    Tiny Turnip Senior Member


  15. Angélique
    Joined: Feb 2009
    Posts: 3,003
    Likes: 336, Points: 83, Legacy Rep: 1632
    Location: Belgium ⇄ The Netherlands

    Angélique aka Angel (only by name)

    Last edited: Mar 12, 2019
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.