How do you rig wood-spoke wheel steering?

Discussion in 'Wooden Boat Building and Restoration' started by Guest, Mar 19, 2004.

  1. Guest

    Guest Guest

    I am searching for a schematic of how wood-spoke wheel sailing yacht steering is rigged. How do you run line through sheeves to rudder (or tiller attached to rudder) and how does it conventionally, or traditionally, work at the wheel? Doesn't line or rope wrap in opposing directions on a spindle through center of wheel? Pics available? Many thanks! Wooden Snipe owner, ggronberg@att.net
     
  2. PAR
    Joined: Nov 2003
    Posts: 19,126
    Likes: 498, Points: 93, Legacy Rep: 3967
    Location: Eustis, FL

    PAR Yacht Designer/Builder

    It can be quite simple to rig rope or cable steering and many very large vessels were rig as such, like the USS Constitution in Boston right now.

    Simply put, a drum, mounted on the back of the wheel (usually covered with a pretty box) and several cheek or deck blocks attached from the tiller (sometimes with a sliding connection) or quadrant/yoke fitted to the rudder or rudder shaft. Line, or more commonly cable is run through the blocks attached to both the rudder fitting and the drum. When turned, the drum winds up one line and pays out the other forcing the rudder fitting (quadrant, yoke or tiller) to move towards the shortening line, turning the boat.

    Sometimes folks run cable through bent pipe to serve as the blocks, but I think there's too much friction and other problems with this setup.

    I hope your not going to butcher your Snipe with this sort of thing . . . Nothing, absolutely nothing gives the feel of a tiller. Every other steering system available has less feel and weights much more!
     
Loading...
Similar Threads
  1. socalspearit
    Replies:
    20
    Views:
    2,723
  2. weedeater64
    Replies:
    15
    Views:
    3,630
  3. Poutoa Papalii
    Replies:
    4
    Views:
    2,279
  4. lewisboats
    Replies:
    17
    Views:
    4,511
  5. adt2
    Replies:
    11
    Views:
    7,992
  6. assycat
    Replies:
    30
    Views:
    9,731
  7. Gunnerbill
    Replies:
    12
    Views:
    4,212
  8. BatuBatu
    Replies:
    3
    Views:
    2,668
  9. HalfDead121
    Replies:
    5
    Views:
    3,066
  10. CDBarry
    Replies:
    8
    Views:
    1,322
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.