What size fuel hose?

Discussion in 'Outboards' started by ted655, Apr 19, 2007.

  1. ted655
    Joined: May 2003
    Posts: 640
    Likes: 14, Points: 0, Legacy Rep: 122
    Location: Butte La Rose, LA.

    ted655 Senior Member

    I have a 115 HP. 2 stroke Yamaha. What size fuel supply hose should I plumb from my tanks?
    Thanks,:)
     
  2. Frosty

    Frosty Previous Member

    Dont make it difficult for yourself. If theres any fittings already on the engine it is likely it will be that size but 3/8 --1/2 inch is ample.
     
  3. lazeyjack

    lazeyjack Guest

    5.16 TO 3/8 HEAPS FOR THIS MOTOR, you will have a filter, pre filter right? very important
     
  4. ted655
    Joined: May 2003
    Posts: 640
    Likes: 14, Points: 0, Legacy Rep: 122
    Location: Butte La Rose, LA.

    ted655 Senior Member

    Actually,there is nothing on anything. The motor came without the connector. The other stuff (yes I have a filter/seperator) is waiting for me to pick the size barbs I choose.
    The only rngine connector I found was a 1/4" barb. I ordered a primer bulb to match. Not big enough?
     
  5. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    out uf the rigging manual it states 5/16 fuel line for this engine and my rule of thumb is when in question use 3/8 for 90hp and up
     
  6. ted655
    Joined: May 2003
    Posts: 640
    Likes: 14, Points: 0, Legacy Rep: 122
    Location: Butte La Rose, LA.

    ted655 Senior Member

    :) 3/8s it is.
    Thanks,
     

  • Loading...
    Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
    When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.