Project progess

Discussion in 'All Things Boats & Boating' started by BHOFM, Aug 26, 2008.

  1. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    No, and not much glue. The joints are all painted before
    assembly. There are four coats on the frame and four on
    the skin and it is assembled while the last coat is still
    wet.

    Just like it was done in 1930. In the instruction they said
    to put strips of muslin on all the seams and use Kuhls bedding
    compound. I am just using a lot of paint! They also said
    that Allen and Clarke would make a sail for it for $42!
     
  2. masalai
    Joined: Oct 2007
    Posts: 6,818
    Likes: 121, Points: 0, Legacy Rep: 1882
    Location: cruising, Australia

    masalai masalai

    Over here they use reinforced concrete to protect the foam floatation (from boat drivers who can't) :D:D:D
     
  3. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    I don't think they can use the wire, it might harm the poor
    little critters! They would not let us use wire cable for mooring
    lines on the buoys because they tried to chew through it, we
    had to use chain and it scratched the boat. I had an old piece
    of fire hose around mine and they chewed on it as well.
     
  4. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Day 15

    Went shopping,, got some more screws, and the caulk for
    the dagger board case and some glass cloth for the inside
    of the case.

    Had light rain several times through the day.

    Ate a nice lunch and came home and mowed grass!

    No progress to report on the boat it self!

    Weather forecast is not real good for the rest of the week.
     
  5. clodgo
    Joined: Feb 2008
    Posts: 116
    Likes: 7, Points: 0, Legacy Rep: 152
    Location: Boston, MA

    clodgo Senior Member

    Hey BHOFM,

    I like your boat, it looks like it's going well. Nice job!
     
  6. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Thanks for the nice comment.
     
  7. Manie B
    Joined: Sep 2006
    Posts: 2,043
    Likes: 120, Points: 63, Legacy Rep: 1818
    Location: Cape Town South Africa

    Manie B Senior Member

    BHOFM i read about your paint story

    must say if you put so much work into something - should have gone for epoxy

    i really find it very easy

    my 2 cents:D :D :D
     

    Attached Files:

  8. masalai
    Joined: Oct 2007
    Posts: 6,818
    Likes: 121, Points: 0, Legacy Rep: 1882
    Location: cruising, Australia

    masalai masalai

    I have been warned to stay away from poxy whores - - so is epoxy some sort of diseased computer thingie?
     
  9. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    I have built several using epoxy. I just want to build this
    one the old way.
    It won't be left in the water more than a day and it will be
    stored inside.

    If it lasts 3 or four years, it will most likely be longer than
    I am able to use it.

    Also, around here wooden boats have no value. I know of
    a dozen large sail boats that are just rotting away and I
    am not aware of one that is on the lake.

    At the yacht club, if you don't have a Hunter, Freedom
    or Island Packet they won't even speak to you.
     
  10. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Day 16

    No comment.
     

    Attached Files:

  11. masalai
    Joined: Oct 2007
    Posts: 6,818
    Likes: 121, Points: 0, Legacy Rep: 1882
    Location: cruising, Australia

    masalai masalai

    Oh so sad this "brand snobbery" - do they drive BMW's too?
     
  12. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    masalai;

    You and I are so old, we think fire is a new fangled thinger
    that will never catch on.
    :p :p :p :p :p :p
     
  13. masalai
    Joined: Oct 2007
    Posts: 6,818
    Likes: 121, Points: 0, Legacy Rep: 1882
    Location: cruising, Australia

    masalai masalai

    BHOFM that is a mighty fine piece of carpentry for a clockmaker... (ever thought of making wooden clocks for the tourists?)
     
  14. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Their house keepers drive BMW's, most of them drive
    Porsches, Vipers, MB roadsters or Jag's and an occasional
    Rolls.

    You have to understand we live in the center of Wal-Mart,
    Tysons Chicken, and JB Hunt trucking.

    Last week there was a Rolls in the drive thru at McD's!
    You see as many as ten or more Vettes at every stop
    light!

    One of our church members drives an Aston Martin and
    leaves the keys in it most of the time. He says, "It's just
    a damned old car."
     

  15. BHOFM
    Joined: Jun 2008
    Posts: 457
    Likes: 14, Points: 0, Legacy Rep: 247
    Location: usa

    BHOFM Senior Member

    Thanks, I make only special order clocks. A dozen or so
    a year. I do a lot of glass etching on them.
    Tourists want a $15 clock. Not a $1500 one.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.