Probabilistic damage stability with autoship

Probabilistic damage stability with autoship .............There is a tutorial?

 

In autoship there is no automatic output of choosing any tanks for the probability of flooding.First the usser should set the damage condition, maybe symetrical,un symetrical or in any kind..

email:eabrenio@hermashipyard.com

 

thanks

 

Bilge and ballast arrangement are to be set manually.here is the example damage run file in order.

Limit title MARPOL DAMAGE STABILITY
Limit (1) Abs Angle at Equil < 25
Limit (2) Angle from Equil to RA0 > 20
Limit (3) RA at Max > .1
Limit (4) Area from Equil to RA0 > .0175


note Damage No1 Condition


Load (FOT1.p).5
Load (FOT1.s).5
Load (FWT.p).4
Load (FWT.s).4
LO(COT*.*).98

so
status
ra /lim /notes


Load (*) 0
Delete all weights
Type (*) Intact



note Damage No2 Condition - FPT ( C ) FLOODED ( FR. 54 - FWD END )


Load (FOT1.p).5
Load (FOT1.s).5
Load (FWT.p).4
Load (FWT.s).4
LO(COT*.*).98


Type (FPT.c)Flooded


so
status
ra /lim /notes

Load (*) 0
Delete all weights
Type (*) Intact




note Damage No3 Condition - VOID SPACE ( P/S ) FLOODED ( FR. 50 - FR. 54 )


Load (FOT1.p).5
Load (FOT1.s).5
Load (FWT.p).4
Load (FWT.s).4
LO(COT*.*).98

Type (VOID.p)Flooded
Type (VOID.s)Flooded

so
status
ra /lim /notes

Load (*) 0
Delete all weights
Type (*) Intact

then so on. what tank need to be flooded.depend on the classification society rule.

mail me if you have question
eabrenio@hermashipyard.com

 

thanks,I'll try to follow the procedure...............