Can anyone point me in the right direction on design considerations for a basic floating platform that will allow an RV of 25', or Van pulling travel trailer (overall length 25-30') with ramp that allows driving the rig onto the bow without the stern lifting out of the water.
This would be for ferrying a RV or travel trailer + tow vehicle across a small/medium size private lake with a tow/tug. This might also be a temporary floating foundation for a tiny home on or off a trailer with wheels (ala floating home), anchored off the lake shore in 3-6' of water with little to no current. And, sufficient stability to ferry said vehicle in typical 3-5' swells in the Florida intercoastal is a plus.
Is anyone building such a floating foundation now? If not, where would I start with design and fabrication? Thanks.
This would be for ferrying a RV or travel trailer + tow vehicle across a small/medium size private lake with a tow/tug. This might also be a temporary floating foundation for a tiny home on or off a trailer with wheels (ala floating home), anchored off the lake shore in 3-6' of water with little to no current. And, sufficient stability to ferry said vehicle in typical 3-5' swells in the Florida intercoastal is a plus.
Is anyone building such a floating foundation now? If not, where would I start with design and fabrication? Thanks.