Plascore layup schedule

Discussion in 'Fiberglass and Composite Boat Building' started by reelpleasure, Mar 2, 2014.

  1. reelpleasure
    Joined: Feb 2013
    Posts: 27
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Massachusetts USA

    reelpleasure Junior Member

    Nidacore layup schedule

    Hello ALL,

    I'm a bit new to this forum. You helped my out with suggestions on epoxying some limber holes.

    As I go forward with my rebuild/rehab/repower of my 1989 25 T Jason lobster boat, I'm getting to the point of laying up and glassing in lateral stringers/deck supports for the hull. This 25 Terry Jason was laid up 100% polyester resin back in 1989.

    I have assorted sizes of 4X8 Plascore (Canacore) panels. I'll be using 1.5" panels for the stringers.

    I plan on two layers of 1708 on each side of the stringer resin will be polyester.

    Stringers will be cut to fit and glassed to the hull and original longitudinal stringers with 1st coat vinyl ester resin and final coats polyester resin.
    My plan is to use three layers of 1808 to attach the stringers to hull/orginal stringers etc.

    What are you opinions on strength? two 1708s and three 1808s sufficient.

    Here are some pics of the original wood/plywood deck held together with nails/screws and some glass on top of the plywood deck.

    Appreciated, Reelpleasure
     

    Attached Files:

    Last edited: Mar 4, 2014
  2. reelpleasure
    Joined: Feb 2013
    Posts: 27
    Likes: 1, Points: 0, Legacy Rep: 12
    Location: Massachusetts USA

    reelpleasure Junior Member

    Recent photos and where I am today with the project
     

    Attached Files:

Loading...
Similar Threads
  1. Deadrift
    Replies:
    10
    Views:
    2,913
  2. reelpleasure
    Replies:
    0
    Views:
    4,353
  3. mwwinklerdc
    Replies:
    20
    Views:
    7,278
  4. hardcoreducknut
    Replies:
    15
    Views:
    11,697
  5. cadmus
    Replies:
    13
    Views:
    312
  6. PickNasty
    Replies:
    17
    Views:
    1,163
  7. JSthebuilder
    Replies:
    2
    Views:
    363
  8. Jeff in Boston
    Replies:
    14
    Views:
    568
  9. Gasdok
    Replies:
    10
    Views:
    1,039
  10. fallguy
    Replies:
    19
    Views:
    1,305
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.