Piranha props

Discussion in 'Outboards' started by razbarb, May 6, 2007.

  1. razbarb
    Joined: Apr 2007
    Posts: 22
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Australia

    razbarb Junior Member

    Would anyone know anything about the piranha modular composite propellers?
    I'm looking at my options with the DT25.
    The current "porridge" prop ( thanks bergalia) measures 9 1/2 x 9 1/2.
    Would a 10 1/4 x 13 push the boat up out of the water quicker, but lower the top speed?
    Thanks.
     
    razbarb, May 6, 2007
    #1
  2. redtech
    Joined: Feb 2007
    Posts: 253
    Likes: 3, Points: 18, Legacy Rep: 27
    Location: suger pine, ca

    redtech Senior Member

    i've played around with but you have to be in clean water any debree and your replacing a blade
    if your running a 9.5-9.5 and go to a 10.25-13 your hole shot and top end with both be hurt the engine has to get up to its max rpm range ?what engine and do you have room to put a 10.25 prop under your cav plate
     
    redtech, May 8, 2007
    #2
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.