1. The Marketplace Forums can be useful for members who know one another well from forum discussions and offline communications and wish to post boatbuilding tools, drafting tools, molds and tooling, and other professional equipment for sale or trade. However, caution and good judgement should always be used. Especially when considering any business with anyone not already well known to you and trusted, due diligence must be used to confirm details and identity and be sure the transaction is safe before any money or property changes hands. Always use good judgement and perform due dilligence and follow these guidelines.

Performance Express Cruiser Molds - 45', 35' & 22'

Discussion in 'Boat Molds' started by whiticar40, Jun 30, 2006.

  1. whiticar40
    Joined: Jun 2006
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Palm City, Florida

    whiticar40 Junior Member

    I am a full service asset liquidation and remarketing consultant located in South Florida. I have available the molds and tooling to build the boats shown below, the larger being 45' and the smaller being 22' and possibly a 35' version as well. If you are interested, please do not hesitate to contact me. I am anxious to move these molds as a result of losing our storage space. I might consider some kind of a joint-venture arrangement to put them into production.

    Thanks,

    Harry S. Lewen
    Harry Enterprises, LLC
    4285 Southwest Martin Highway
    Palm City, Florida 34990
    (772) 260-4446 Voice
    (772) 288-2135 Fax
     

    Attached Files:

  2. RealityBoatCo
    Joined: May 2004
    Posts: 93
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Bucyrus OH

    RealityBoatCo Junior Member

    Do you have some more pictures of the 22? I might have a market for that one.
     
  3. whiticar40
    Joined: Jun 2006
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Palm City, Florida

    whiticar40 Junior Member

    The 22' was the half scale prototype for the company's original 38'-40' boat, it's essentially a 19' with a 3' extension so you could mount outboards. Very narrow, but very sharp boat. The wooden 19' prototype ran nearly into the mid 60's with twin 70HP outboards. Call me for more information if you are still interested.

    Thanks,

    Harry S. Lewen
    Harry Enterprises, LLC
    4285 Southwest Martin Highway
    Palm City, Florida 34990
    (772) 260-4446 Voice
    (772) 288-2135 Fax
     
  4. WindSurf
    Joined: Aug 2005
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Canada

    WindSurf New Member

    What are your prices for the 22' and 38'....
    Does it include everything (Hull, deck...etc) or just the hull
    What is the price for the hulls only...

    Thanks
     
  5. whiticar40
    Joined: Jun 2006
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Palm City, Florida

    whiticar40 Junior Member

    I will not seperate the hulls and decks. There is no mold for a 38, just for the 45. The 38/40 molds were sold back in the late 1980's to a company in the middle east and haven't been seen since.
     
  6. WindSurf
    Joined: Aug 2005
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Canada

    WindSurf New Member

    Hi there...
    What mold sizes do you have currently....
    Do you sell them seperatly or as a full...( hull, deck.. etc,)
    What is your price...(for the hull...for the deck....and a full price fro both..)

    Thanks
     
  7. whiticar40
    Joined: Jun 2006
    Posts: 25
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Palm City, Florida

    whiticar40 Junior Member

    Windsurf:

    Please call me at 772-260-4446. I'll explain what I have available.

    Thanks,

    Harry S. Lewen
    Harry Enterprises, LLC
    4285 Southwest Martin Highway
    Palm City, Florida 34990
    (772) 260-4446 Voice
    (772) 288-2135 Fax
     
  8. mosquita
    Joined: Nov 2003
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: HOLLAND

    mosquita New Member

    Molds

    Dear Sir,

    We are producing yachts in Alexandrie Egypt,

    have interest in your boats.

    Make me a offer.

    Brongers Classic Boats & Marine Trade

    Holland

    Albert Brongers
     
  9. mosquita
    Joined: Nov 2003
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: HOLLAND

    mosquita New Member

    Molds

    Dear Sir,

    We are producing yachts in Alexandrie Egypt,

    have interest in your boats.

    Make me a offer.

    Brongers Classic Boats & Marine Trade

    Holland

    Albert Brongers

    0031104267777
    0020125654677
     

  10. ercraig
    Joined: Apr 2017
    Posts: 0
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Ohio

    ercraig New Member

    boat molds

    Are any of these molds still for sale? If so can you send me the info and price to take all of them. ercraig6416@gmail.com
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.