Tilt and Trim

Discussion in 'Powerboats' started by bigbuck, May 8, 2006.

  1. bigbuck
    Joined: May 2006
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: ca

    bigbuck New Member

    I have a 2003 Suzuki 90 with 80 hrs on it. I just took it out of storage and the tilt and trim is not working. The pump motor runs but it won't lift the engine. How do you check the fluid and what is the proper level.
    Any thoughts, thanks
    bigbuck.
     
  2. marshmat
    Joined: Apr 2005
    Posts: 4,127
    Likes: 149, Points: 63, Legacy Rep: 2043
    Location: Ontario

    marshmat Senior Member

    There should be a dipstick or level window on the trim pump fluid tank, which should be adjacent to the trim pump. It's rare for the fluid to leak out totally; if there's fluid in there (which there probably will be), you might have a swelled-up seal in a ram.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.