Outboard dxf files

Discussion in 'Software' started by wojtek_pagacz, Mar 31, 2011.

  1. wojtek_pagacz
    Joined: Feb 2008
    Posts: 10
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Canada

    wojtek_pagacz Junior Member

    I'm looking for a 9.9-15 hp outboard engine drawing(.dxf, .dwg etc) to fit in a 2.75 m RIB GA. Anyone know where I could find one?

  2. Olav
    Joined: Dec 2003
    Posts: 321
    Likes: 46, Points: 38, Legacy Rep: 460
    Location: Filia pulchra Lubecæ

    Olav naval architect

  3. DCockey
    Joined: Oct 2009
    Posts: 5,030
    Likes: 515, Points: 113, Legacy Rep: 1485
    Location: Midcoast Maine

    DCockey Senior Member

    Thanks for the link.

    At IBEX 2010 I asked the folks at several outboard manufactuers' displays about the availability to independent designers of CAD files of the exterior of their engines. I explained it would be very helpful to the designers for packaging their engines and also that it might help their sales if one of their engines was shown on the plans. The replys were negative, along the lines of the files are confidential information, available only to builders we have agreements with.
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.