Open 60 Corel <=12 ?

Discussion in 'Sailboats' started by Kormoran, Aug 12, 2016.

  1. Kormoran
    Joined: Aug 2016
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Poland

    Kormoran New Member

    Hi,

    I'm looking for a drawing of a Open 60 class yacht, which is not saved as a bitmap or jpg, but as a curve vector file. Can anyone help me find one?
     
  2. TANSL
    Joined: Sep 2011
    Posts: 6,203
    Likes: 293, Points: 93, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    If you have a body lines plan in any image format, it can be vectorized with a CAD program.
     
  3. Kormoran
    Joined: Aug 2016
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Poland

    Kormoran New Member

    I tryed vectorize in Corel, not bad, but it isn't i what i want. Each element, mast, sails etc. should be on different layer. This is my target.
     
  4. TANSL
    Joined: Sep 2011
    Posts: 6,203
    Likes: 293, Points: 93, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Try it with AutoCAD or any similar CAD program (2D, not rendered models)
     

  5. Kormoran
    Joined: Aug 2016
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Poland

    Kormoran New Member

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.