oil in a pp 60 jet

Discussion in 'Jet Drives' started by montyrosevear, Jun 12, 2011.

  1. montyrosevear
    Joined: Jul 2008
    Posts: 23
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: cornwall. uk

    montyrosevear Junior Member

    Hi guys i read some were on here that a pp jet need oil as i stripped my jet down and found no place for oil let alone any oil, Were would the oil go as im about to give my boat sea trial's and would hate for some thing to seize thru me not asking the pro's were and how to get to the iol. diagrams would be great if you could help. here or at montyrosevear@aol.com
     
  2. anthony goodson
    Joined: Mar 2007
    Posts: 438
    Likes: 17, Points: 18, Legacy Rep: 256
    Location: Dorset UK & Murcia Spain

    anthony goodson Senior Member

    If its a PP 65 you have, then the DU bush in the stator centre should be lubricated with EP 90 or similar. Remove the stator housing and fill the centre cavity about one third full. Be careful not to turn the lip of the seal or hydraulic it out as you replace the stator unit.
     
    1 person likes this.
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.