mercruiser alpha one gen 2 won't start

Discussion in 'Sterndrives' started by steve3211, Apr 4, 2008.

  1. steve3211
    Joined: Apr 2008
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: california

    steve3211 New Member

    2003 reinell with a 4.3L alpha one gen 2 mercruiser turns over fine but won't start. Put a little gas in carb and it fires but will not continue to run. I started boat over winter a couple of times and also added some fuel stabilizer. Currently close to quarter tank. Any ideas would be appreciated.
    Steve
     
  2. lazeyjack

    lazeyjack Guest

    your carb could be gummed up, can you strip it?
     
  3. steve3211
    Joined: Apr 2008
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: california

    steve3211 New Member

    thanks jack. Do you mean take the carb off and clean it? I probably can
     
  4. lazeyjack

    lazeyjack Guest

    yes get a clean large piece of cloth or paper , and carefully strip the thing, laying parts out on it , take pics of it if you want
    if you have air blow it out, sight up the jets, be careful not to ream them but a wire off a wire brush is often handy
    petrol(gas) engines dont like being laid up
     

  5. steve3211
    Joined: Apr 2008
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: california

    steve3211 New Member

    yeah I can probably rebiuld it. Have you used sea foam or any other carb cleaner with any success.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.