New Fishing Boat Design

I am looking at getting a Architect to design a new "fast fishing boat" to put into production. I want the hull to be very stable at anchor but also to be able to achieve speeds of 35knt with no more than a 90hp outboard. The boat wants to be 18' - 20' in length. Any ideas?

 

ASD / Fast Fishing Boat "Octopus"

I propose to you an ASD (Arrow System Design) application for fast fishing boat.

More details about ASD hull system in the web:

www.ranchidesign.com

This is only a rough sketch that can be adapted to specific operational requirements and dimensions.

 

thanks for the link. I am looking for something abit smaller, and i want to go into production in grp (moulds). i like the hulls of the Boston Whaler, but don't lnow what they will looklike with a cuddy up front.

 

Call LaRosa Design at 615-763-0931 Ask for George Daly

 

Fast sport fisher

Have a look at our Uniquest 600, I've not tried it with a 90hp but it does 42knots with a 150hp IB diesel and probably a bit more with a 150hp OB
www.uniquest-marine.net

 

that is a very nice looking boat. is it stable at rest?

 

Uniquest 600

Very stable at rest, it has a 2m60 beam, feels like you are on a 7m boat, especially with the flaired bows.
I'm evidently biased though as I designed it

 

how is it manufactured? what materials? what is the normal weight of the bare boat (no engine)

 

Uniquest 600

It is made out of a fiberglass/spherecore SBC sandwich, 10mm spherecore for the bottom and spherecore 6mm for the sides and flat areas of the deck.
The hull and deck are held together by vertical 40mm foam cored longetudinal stringers.
The two outer logitudinal compartements and the bows are foam PU filled.

 

Uniquest 600

Sorry, the weight is approx. 900kgs without motor

 

so is that made in a mould then?

 

a friend of mine made a reation 25 fishig boat that had a pad that was so fast that he had to change it for safty . i build rails ,consoles,dive platforms or one off products. t-tops ,bow rails .we have full fab shop .if their is anything i can help you with to make your idea a reality plesae fell free to send me an e-mail i've done work for omc boat company and rescue boats .i am now looking for new products to produce for an up ancomming boat design like this . i have 20 yrs in the marine busniess 5 yrs in my own shop quality welding. stainless steel and aluminum tig welding anyhelp on ideas or products i would be glad to help. we ship around the world

 

Uniquest 600

Yes our boat is made in a mold, I'll try to send you some constructional photos tomorrow if you are still interested inspite of the "welding stuff, etc"

 

yes please send me photos.

thanks

 

Uniquest 600

Here are a few photos