need advice for 89 cobra omc 5.0 exhaust

i am lookin for ideas for a 1989 cobra omc 5.0 exhaust manifold mine are cracked and they are no longer in production what ideas dose everyone have for finding some or what will work any ideas are open

 

I'm not sure where you've looked, but if you provide more information, I'll bet we can come up with the manifold you need. First of all is it the manifold, riser, elbow or what that you need?

Is it the 4 bolt flange like this?

Is it the 6 bolt flange like this?

Is it the log style like this? (probably not seeing as it's a Cobra drive)


All of these manifolds are available. The 4 bolt is about $180, the 6 bolt about the same and the log style is about $100 more.

Can you post pictures of the manifolds?

 

exhaust

i will try and get some pics up they are the long stile manifold tho and do u have a number to reach you at

 

They are all available. If you have a casting number it is easier. Otherwise, post a photo. I am in Wisconsin and can have them shipped directly to you.

 

I'm in the same boat Gonzo and can ship from here, but I don't know what he has and the log style doesn't sound right on a Cobra installation. The 302 would have used a 4 or 6 bolt flange, not the log in 1989's, so I suspect something isn't right.

89cobramc5.0, click on my name and contact me through email.

 

manifold pics

here are the pictures

 

another pic

one more pic

 

hope these work

more pictures

 

Send me an email and we can discuss your options. Casting numbers would be very helpful too.

 

ok sent ya one let me know if u get them

 

Yep, that's a log, with a wet, 4 bolt flange.

 

it is a 1989 vip victory cobra 5.0 ant those were deffently the right manifolds that went on it found a blow up on the net and the part numbers on the manifolds them self and they matched up were should i go from here

 

I suspect the manifolds you want aren't OMC, but Mercruiser. At least according to the OSCO and GLM catologs this is what you have.

 

89cobra, any luck with the manifolds? i have the same manifolds on my 5.0cobra and i am looking for the right one.
please reply when ever you have time

luis

 

yep

yea there is a conversion kit on ebay i bought them and they work great no problems what so ever here is the item number 160539981730 yours is a ford right let me know if u have any problems finding them it comes with everything u need