Need a Navico WD200 (Wind display) junction box

Discussion in 'OnBoard Electronics & Controls' started by cruiserpete, May 1, 2013.

  1. cruiserpete
    Joined: May 2013
    Posts: 5
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Australia

    cruiserpete Junior Member

    Hi all,

    I'm not sure if you're able to help out but it's worth a go.

    I've got a working Navico WD200 Mast head transducer (air speed & direction) and working Display unit however, my junction box is not functioning and is unrepairable. Hence, I'm looking for a junction box (the one with the electronics in) or I don't mind a complete set just to get a junction box.

    I've been keeping my eye out on eBay and missed a junction box by a couple of days (Bugger)

    Cheers, Pete
    I'm in Australia so happy to pay postage.
     
  2. sailorman675
    Joined: May 2013
    Posts: 1
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Germany

    sailorman675 New Member

    Hello Pete,

    not sure if you are still searching but just have found the following offer on ebay (Germany) that might be interesting for you:
    http://www.ebay.de/itm/navico-Nav-I...944?pt=Bootsteile_Zubehör&hash=item19dc659018

    I am currently trying to repair my masthead unit, the plug needs to be re-attached, and I don´t know in which orientation. Could you post or send me a pictur that shows how the plug of the mastheads unit needs to be mounted?
    There is a small leading edge on the plug, and I don´t know if it needs to be on the upper or lower side.

    Thanks,
    Christian
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.