multisurf wamit command

Discussion in 'Hydrodynamics and Aerodynamics' started by artimus2k, May 10, 2016.

  1. artimus2k
    Joined: Apr 2015
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: budapest

    artimus2k New Member

    Hi everyone!!
    someone has used the File.Export3D.GDF1 command from multisurf?

    thanks
     
  2. jehardiman
    Joined: Aug 2004
    Posts: 2,870
    Likes: 418, Points: 83, Legacy Rep: 2040
    Location: Port Orchard, Washington, USA

    jehardiman Senior Member

    Yes. Make sure you understand WAMIT requirements if you are having trouble. The model blocks must separate exactly on the waterline and the co-ordinate system origin needs to be the reference for the original position data in the run files.
     
  3. artimus2k
    Joined: Apr 2015
    Posts: 3
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: budapest

    artimus2k New Member

    multisurf wamit command reply

    hi Jehardiman...
    As first step, I want to reproduce the wamit example test11.gdf
    i tried export from test11c.ms2 and also I did my own version (link), but i have differents values using the multisurf command
    why happened that?

    thanks by your reply!

    arti
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.