Mould building 101

Discussion in 'Boatbuilding' started by erikssonniklas, Sep 14, 2007.

  1. erikssonniklas
    Joined: Sep 2007
    Posts: 6
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Stockholm

    erikssonniklas Junior Member

    Hi Everyone

    I am planning to build a fibreglass mould, something I have never done before. In this mould I am building a 3 meter long fibreglass blade for a small size wind generator. This first mould will only be the mould for the prototype.

    Now to my questions;

    Where can I find a good book/DVD/or online manual for step-by-step mould building?

    Infusion or closed moulding processes is not for me at this stage, but I would like to try vacuum bagging after wet-lay up, which start-up kit/manual is recommended?


    Thanks in advance //Niklas
     
  2. KnottyBuoyz
    Joined: Jul 2006
    Posts: 829
    Likes: 55, Points: 0, Legacy Rep: 685
    Location: Iroquois, Ontario

    KnottyBuoyz Provocateur & Raconteur

Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.