Mosquito habitat

Discussion in 'Boat Design' started by Rich867, Jun 4, 2020.

Tags:
  1. Rich867
    Joined: Jun 2020
    Posts: 3
    Likes: 0, Points: 1
    Location: Texas

    Rich867 New Member

    I recently purchased a ‘04 20’ G3jon boat an want to know if there is a secret on cleaning out the debris that is built up in and under the hull.... to allow better drainage.. basically the water sits in all the hard place to reach and doesn’t drain around or through the canals that have clogged up with mud.
     

    Attached Files:

  2. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Try a pressure washer in those areas to break it loose. If a garden hose will fit that might work.
     
  3. hoytedow
    Joined: Sep 2009
    Posts: 5,857
    Likes: 400, Points: 93, Legacy Rep: 2489
    Location: Control Group

    hoytedow Carbon Based Life Form

    Narrow tip on a shop vac might help.
     
  4. Rich867
    Joined: Jun 2020
    Posts: 3
    Likes: 0, Points: 1
    Location: Texas

    Rich867 New Member

    I want to try the shop vac. Do local boat shops have special cleaning tools?
     
  5. kapnD
    Joined: Jan 2003
    Posts: 1,302
    Likes: 414, Points: 83, Legacy Rep: 40
    Location: hawaii, usa

    kapnD Senior Member

    You might cover it when not in use, it’s a good idea to keep the sun off of it too.
    Raise the trailer tongue high, so drainage is insured.
     
  6. fallguy
    Joined: Dec 2016
    Posts: 7,644
    Likes: 1,688, Points: 123, Legacy Rep: 10
    Location: usa

    fallguy Senior Member

    I like water to clean out mud.

    Tip jer up and set a ladder or scaffold on the side and let the water run hard.
     
  7. Blueknarr
    Joined: Aug 2017
    Posts: 1,456
    Likes: 418, Points: 83
    Location: Colorado

    Blueknarr Senior Member

    You might try a plumber's snake.
     

  8. Squidly-Diddly
    Joined: Sep 2007
    Posts: 1,958
    Likes: 176, Points: 63, Legacy Rep: 304
    Location: SF bay

    Squidly-Diddly Senior Member

    first apply strong 1:1 solution of water and Simple Green, then invest in good hose attachment with needle nose, and a needle nose shop vac attachment (the only way to fill inflatables IMO) and some tubing to fit over both of those. If that don't work try electrician's "fish tape".
     
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.