module problem

Discussion in 'Software' started by Hunterr, Apr 7, 2017.

  1. Hunterr
    Joined: Jun 2015
    Posts: 28
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Korea

    Hunterr Junior Member

    SCT-12215-5 module problem

    this program is scantling program made by ICOMIA.

    when i start this program, error occur like "application's launch was blocked by another program."

    How can I fix it...?

    T_T.. help me..

    ps . I installed this program on 5 computers in my office, buy only one computer has no problem to work properly...
     
    Last edited by a moderator: Apr 7, 2017
  2. TANSL
    Joined: Sep 2011
    Posts: 3,977
    Likes: 29, Points: 58, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Sorry Hunterr, your problem is with ICOMIA program, not with SCT. I'm right?
     
  3. TANSL
    Joined: Sep 2011
    Posts: 3,977
    Likes: 29, Points: 58, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Hunterr, my friend, the first line "SCT-12215-5 module problem" clearly indicates that SCT is having problems. Frankly, I do not think it's fair. If you do not mind, please change it. I do not have to be harmed by mistakes that are not mine.
     
  4. jarmo.hakkinen
    Joined: Jun 2007
    Posts: 65
    Likes: 2, Points: 8, Legacy Rep: 25
    Location: Kerkonkoski

    jarmo.hakkinen Junior Member

    It is possible, that your antivirus is blocking it. Add it to the exceptions list there.
     
  5. TANSL
    Joined: Sep 2011
    Posts: 3,977
    Likes: 29, Points: 58, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    Starting with Windows 7, Windows self security prevents some programs that are considered as "malicious" from saving files on the hard disk. This is ridiculous because many "non-malicious" programs are prevented from working correctly but any hacker is able to introduce a dangerous virus into your computer without Windows knowing it.
    The attached file shows how to avoid this problem. The pictures are in Spanish, not the texts, but I think they can be understood perfectly.
    I hope this helps.
     

    Attached Files:

  6. Hunterr
    Joined: Jun 2015
    Posts: 28
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Korea

    Hunterr Junior Member

    exactly right!!
    your program is excelent and I used often now.
    but ICOMIA program can show the picture so i need it
     

  7. TANSL
    Joined: Sep 2011
    Posts: 3,977
    Likes: 29, Points: 58, Legacy Rep: 300
    Location: Spain

    TANSL Senior Member

    That's right, SCT does not automatically incorporate images into your project. And that, why?. Because the normal procedure is that the user, before starting the calculations, prepare a scantlings drawing, that must be incorporated in the general project of the boat. This drawing is created with any drawing program available to the user. It should include several things:
    - main dimensions of the boat.
    - areas where the hull is divided for scantlings reasons.
    - main frame, transversal bow section and aft section, with their longitudinal reinforcements.
    - at least, one generic watertight bulkhead.
    - longitudinal profile with position of the frames and frame spacing.
    - main deck with its reinforced.
    - any other detail that defines the structure.
    - each specific detail of this drawing must incorporate the measurements that will serve as input data in SCT calculations.
    Once the calculations have been made, they must be incorporated into the scantlings drawing. The outputs of SCT are nothing more than the justification of what has been indicated in the drawing.
    That drawing must be, along with the calculations of SCT, in the project of the ship, as is demanded by the regulatory organisms (see any CS Regulations). Any other picture could be very decorative but, technically, is not necessary.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.