ModelMaker/Autoship

Discussion in 'Software' started by nikkos5, May 12, 2011.

  1. nikkos5
    Joined: Nov 2010
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Las Palmas

    nikkos5 Junior Member

    Hello!!

    I'm back here with my typical problems with converting an Autoship file into an .gf one. I'm ready for my stability study so I need to design the tanks and place the loads on my ship, however I cannot produce a working .gf file in order to work with it in Autohydro and Model Maker, I believe it has something to do with the units. If somebody could help me with this I would be very very very grateful (I'm almost done with this project). Thank you for everything, I enclose the Autoship file.
     

    Attached Files:

  2. zeroname
    Joined: Oct 2008
    Posts: 276
    Likes: 5, Points: 0, Legacy Rep: 90
    Location: Europe

    zeroname Naval Architect

    check if that help you,, produced with autoship 10
     

    Attached Files:

    • ship.gf1
      ship.gf1
      File size:
      29.4 KB
      Views:
      599
    1 person likes this.
  3. nikkos5
    Joined: Nov 2010
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Las Palmas

    nikkos5 Junior Member

    Thanks again Zeroname,

    You saved the day once more (I'm thinking about adding you to the credits of my thesis already, ;o) The file worked beautifully, and I even found the problem I had to save a working .gf file by working on the file you posted. It was about my computer's settings, because of the language and regional settings, it would go crazy on me because of the commas and periods... can you believe it??? Anyway, now the problem is that when converting I group together the surfaces of my ship, the hull, the deck and the transom stern, and I create the HULL file, when I open it I have the HULL part that contains only the hull (casco) and deck (cubierta), the transom is nowhere to be found wich is such a disaster since I cannot make it work (again.....). I would apreciate any input on this matter. Thanks in advance!!!
     
  4. amjad357
    Joined: Jul 2011
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: U.A.E Dubai

    amjad357 Amjad

    Dear All,
    I Want To Convert My Hull Drawing .iges File Format To .gf Can Someone Could Convert My File Please.....
     
  5. nikkos5
    Joined: Nov 2010
    Posts: 13
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: Las Palmas

    nikkos5 Junior Member

    Hello Amjad,

    Maybe if you post the file, we could help... Also, you created the .iges file with Autoship?? I you gave a little more detail....
     
  6. amjad357
    Joined: Jul 2011
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: U.A.E Dubai

    amjad357 Amjad

    hi nikkos,
    i can not post my file because one error appearing durining uploading the file
    if you can give me email i will send you email....
     
  7. amjad357
    Joined: Jul 2011
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: U.A.E Dubai

    amjad357 Amjad

    Dear all,

    I want to convert my file .iges to .gf format if some one can do it please convert my file..
    Earlier thanks...

    KIND REGARDS
    Muhammad Amjad
     

    Attached Files:

  8. amjad357
    Joined: Jul 2011
    Posts: 18
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: U.A.E Dubai

    amjad357 Amjad

    I attached my file i want to conver it .iges to .gf format please if you can do it.

    Earlier thanks
     

    Attached Files:


  9. saga
    Joined: Sep 2011
    Posts: 2
    Likes: 0, Points: 0, Legacy Rep: 10
    Location: INDIA

    saga New Member

    Plz tell me what is the command for ICLL Damage Stability in AUTO HYDRO.
     
Loading...
Forum posts represent the experience, opinion, and view of individual users. Boat Design Net does not necessarily endorse nor share the view of each individual post.
When making potentially dangerous or financial decisions, always employ and consult appropriate professionals. Your circumstances or experience may be different.